kalopooo

The horn has been replaced and works (happy)! And new handles here. Tomorrow I will install them ...

Two problems solved .... It remains to try another horn ... Tapping has proved not tighten inner tie rod (my mistake)! And well it is just that, not rack itself (Goodness) ....: D I had a problem with one of the brake hose (already determined). Only horn remains to be determined ... Soon new Aluminum radiator! The old one was like a fountain ...... Swap to rear disc brakes. Then .... New discs and pads, as long as I have money and time. And.... A new exterior handles (for doors) because one falls. And the other is not much better ....

Not replaced! A new set of rear (as a gift)! I already have 6 damper ..... Which Kev and BC racing, made ​​a great impression on them ....

I think the problem is in the horn itself. Everything else seems fine .... Whether to try some? Or no risk! I guess not a big deal (Chinese) .... But it would be something if they blow ..... Coilovers I have not put yet! Today or tomorrow I put summer tires. And to solve the problem of knock-it then bushings and then put the coil ....

I forgot to say that I checked the fuse and I changed it .... But no difference. The most interesting thing is that it works in the morning and afternoon is not .... Tomorrow I will see what I will do.

These days I will deal with small problems that p**ses me off a lot ..... yesterday stopped horn (unknown problem), which came out of nowhere .... For several days I have strange sounds from the front which is like tapping, I do not know from where. So hopefully I can deal with these problems because damn annoy me and I do not want to drive in this kind .....

Fender washer already here .... This is a copy of PWJDM, but I do not think I would have a problem with them. Does look pretty good and only cost me £ 5 for one pack .... lol

Continue shopping ..... New polyurethane bushing for stabilizer bar (energy suspension) and some PWJDM fender washers (blue)! And the new oil .... Which is Millers Oils XFS 5w-50 Full Synthetic Engine Oil.

Everything came as it should even have been here since noon ..... I'll put them later because right now I have no time. At least I know that ride very well ....

Damper on their way. I expect to be here on 11.

A friend decided to make a few stickers and decided to take a few ....

While waiting, coilovers decided to stick a sticker on the car .... First I thought I'd stick them on the rear window on the left, but then I decided to stick them so!

Everything is ok! Will have new longer shocks completely free .... They were very understanding (especially Kev) with whom we spoke, and there were no problems. For which I am very happy. Will write and when they arrive .....

We have to develop but I will say when it is 100% clear! Until then I'll stick stickers .... hahahaha

Here are the pictures! I'm sorry but I had no time to wash it .... Before!

I wrote them an email to see what they say. I hope to be honest because I'm terribly nervous ....

That's exactly what they did ....

Yep!!! Back is the highest level. But the car sits too low. Consider me make custom forks that are longer to compensate for the height ... Once off the car will think what I'll do.

Coilovers are installed but will soon be on the market ........ Unfortunately for me the car comes too low. When I asked BC Racing ..... They said that it was for MB, which means they have to be fit and MA (chassis)! I'll do take the pictures on Wednesday to see what I mean .... I'll write more when I upload the pictures ..... But the project does not stop, that's for sure ....

Already this Saturday. I hope ....

Big News! After work .... At home waiting for me this: Will be mounted as soon as possible. Looks solid and quality! And stickers .... LoL

News! Install new rack (PSF-S fluid) + front bar! New motor mount (left and right) .... New Boot for the right axle (outside)! + Grease. Difference there and feels! I hope after I put back to become even better and with the suspension happen as I want. Before: After: Unfortunately, not put back because they did not want to drilling (control arm) when on the car, want to be removed and to drill properly. Which might be next week, then comes the suspension ......

Great! I hope that soon my car to look like a little bit of your ...

Small update! Rack finished and looks like new (for me). New out and in tie rod, new bellows, new paint. I did everything myself ..... And I'm happy with what I did! That is the difference! Before: After:

Coilovers are ordered but something delayed remittances . I hope by the end of this week or early next week to be here! And there will be lots of pictures .....