ryan..
-
Posts
587 -
Joined
-
Last visited
Content Type
Store
Calendar
Forums
Gallery
Downloads
Posts posted by ryan..
-
-
heres a guide i made in HCF
-
how do you do an ecu re-set?
-
could do, i'll ask him for a price
-
Will an MC2 one fit?
I found a place selling them for MC2's for £50 but they dont list one for the mb6.
http://www.carbrakecalipers.co.uk/index ... f0f7808e2b
Euro car parts have them for £84 but add a surcharge to bump it to £131 each...robbing b*****ds and honda want £240 each lol
-
not you I was talking about chap. Some knob on ebay, it was ages after that I found out so had to just accept it and bin them
-
because 2nd hand ones are tatty and dont guarantee to be in good condition. The last set of 2nd headlights I bought turned out to be LHD ones and were broken.
-
Im looking to replace my headlights and i'd like new ones. Bar Honda where they are £280 a pair for the basic headlight (not including up/down adjuster etc) where can you buy them?
-
poo why do i have bolts all round? thats means if i buy a MB6 bearing its going to have studs and all my others have bolts? man the previous owner of my car was a complete duche......
You sure?
Ive had 2 mb6's and an EJ9. ALL 3 had studs
-
Just previous experience was good
Same, got a sigma on my MC2 it goes off randomly sometimes
I also shut my boys in it to the car to test the proximity sensors and it didn't go off! But when the dog is in there and I turn it off then it does!
It's not a bad alarm, but I have had more false alarms on it than I ever got with the Toad
proximity sensors are external sensors not internal mate. They are the sensors which make clifford alarms beep when someone is too close to the car
-
I had mine fitted at a Sextons, don't know if they still exist but the work was first rate.
depends on the people there tbh
I had my alarm fixed by sextons in swindon and was impresed by their work, sextons in Trowbridge on the otherhand had a really bad rep.
-
who ever that was DONT use them.
They dont remove the immobilier and as you have remote central locking all ready no motors should be needed.
The toad ai606 or Clifford Concept 650mk2 would be my choise.
£379 is an average price BUT be very careful who you choose. Alarms are only as good as the installer and a well fitted cat1 in a car like the mb6 should take a minimum of 4-5hrs imo. Any less and i'd be asking questions.
Once its done ask where everything is and have a look. I had mine done by a bloke from colchester and it was awful. I had to spend a load of money to get it right and it gave me hassle for over a year after he fitted it.
-
as above, ek/ej kits will fit BUT you can buy kits for MB's so why get an EK/EJ kit?
They fit but not perfect and the extra weight means it will sit a bit low. I have FK Highsports on my MB6 which were off my EJ9, so far ive had to replce the rear dampers as one emptied its self of fluid lol
Look at meister-R as they do MB kits.
-
if you are leaving the suspension standard then 15 with low profile tyres so they are about the same size as the standard 14's. Anything else would look stupid
-
do you have the original headunit? If so swap them back and check the reception out. It could be the headunit has a problem with its tuner.
Also you may have a break or fault with the cable going from headunit to aerial. Test it by hooking the cd player up to the car but fit an aerial into it which isnt the one on the car. This will rule out the cable
-
do you have the original headunit? If so swap them back and check the reception out. It could be the headunit has a problem with its tuner.
Also you may have a break or fault with the cable going from headunit to aerial. Test it by hooking the cd player up to the car but fit an aerial into it which isnt the one on the car. This will rule out the cable
-
R reg vti-s, just hit 100k
-
R reg vti-s, just hit 100k
-
thats not a vti back box mate, thats an aftermarket one so you need to declare it to your insurance.......bend over lol
-
Nice to see another one with 16" speedlines, they look so much better on the MB's than the 15" ones
thats a bit odd power wise, gained 10bhp but lost torque.
Have you had the limited modded? the limiter is about 8450-8500 lol
-
what lights are you using?
Sounds like you are burning the inside of the lense with the lights.
-
tbh that thread does not help at all. There is no key telling you what each part is on the bottom pic and the description changes its mind of what to call stuff. Doesnt make much sense tbh
-
you thinking of an egr valve?
was constantly in max powah etc years ago
-
i heard you cant align the rear wheels civics and need rear adjustable camber arm!!!can anyone confirm this ????
no you cant unless you get a suspension setup which allows for it
-
ive just some Helfrauds Advanced 3 tonne stands (3 tonne as they didnt have the 2 tonne ones and came to the same price with my mates trade card). They have a notch at the bottom for the sill points but will also fit most other places too
fuel gauge and reverse lights
in Electrical
Posted
the fuel gauge should not move when you turn the ignition off so something has fixed its self