Calster17

I've seen this has been asked a few times regarding the MG ZS seats, and guessing that 45 seats will be the same but wanting to double check. A 45 saloon at my local scrappy has a set of full leather seats, and wondering if they'll fit my MC1 Aerodeck, I'm guessing the front's won't be a problem to put on but it's the rears im concerned about, as not sure if the 45 saloon has folding rear seats(could't have a proper look as the rear doors were locked). The front seats have airbags in them as well, so im also wondering if that'd be a problem as well? Would need need the set as the seats are a dark gray, and just having the front's that colour would't look right for me. As well as the 45, there's a MG ZS, which I'm wondering if the steering wheel would fit? and if it'd be a straight change, and again if the airbag would be a problem? The last question is about the ZS instrument cluster, and if that'd fit? Thanks in advance.

Sorry, never had pictures on the computer at the time. It's for my MC1 Aerodeck, 1.6i SE. Heres the top of it: Downpipe - Top by CarbonCoffee, on Flickr And the bottom:Downpipe - Bottom by CarbonCoffee, on Flickr Hope there of any help. At the moment I've managed to re-connect the cat & the downpipe by useing two jubilee clip's, exhaust wrap and some gum gum paste, which so far is lasting for now, just to keep the noise down.(working night shift and coming home at 4am with a car sounding like a WW2 fighter plane and the neighbors arn't happy!)

Hi My down pipe and catalytic converter have broke apart, so I bought a new down pipe and middle pipe (middle pipe already has a 'fix' on it from a past hole i had a few weeks back). The down pipe on mine is a twin pipe by the manifold and then joins to one, which I discovered after i'd gotten home with the parts. After taking it back today and saying, the shop tried to order one of correct pipes, but they could't get hold of one as there system never had it(had pictures, but not the pipe), and went to say that it's a Honda only part, which i'd have to go to a Honda dealer. Not wanting to see what Honda would charge, I'm going to get one online, and was wondering if anyone would know anyplace that'd sell the correct pipe. I've looked on eBay but not wanting to get the part in case it's the wrong one(and then have to go to the hassle of sending it back and such. Thanks in advance.

I had a look the drivers door to see, and the lock was very dirty(others were clean), gave it a clean and so far it's been fine! Thanks.

This past week I've seen that my interior light has been flickering on and off at times, because the drivers door is apparently not shut.(No matter how hard you slam it). It's not all the time, mostly on bumpy roads or if i lean on the door. I've sorted the problem for now by just turning the light off all the time. Is this a common problem for M Civic's? I'm guessing it's just loose wiring thats causing it? but would anyone have any rough ideas what wires it'd be? Thanks in advance.

Hi. I'm new to modding, tuning and such and would like to do some simple but effective things to my Aerodeck, but not sure whats the best way to start with. I've been reading here that parts from the MG ZS fit, such as suspension parts and Anti-roll bars (as well as a host of other parts like interior stuff) fit onto MC1's? and would like to try these out. As well as this, im going to be changing the brake disk's & pads soon, and wondered if anyone had any recommendations on some good ones? Any other ideas that could be done? Thanks in advanced.