-
Posts
292 -
Joined
-
Last visited
-
Days Won
18
Content Type
Store
Calendar
Forums
Gallery
Downloads
Posts posted by hondasport
-
-
-
did you noticed a big diffirence with the new ecu?
-
this week is work week for me
This is what I done today, and a few things last week with my buddy.
Installed a fuel pressure sensor, still needs to wire it up to the utcomp board computer.
Heatwrap around the manifold and spike nuts.
Replaced the coolant hose that runs to the throttle body, the one that connects with the iron piece where the carter ventilation is. Now it's a hose in 1 piece.
Replaced the d2 intake hose with a custom intake pipe with a heat cover around it.
Did this also with the cold air pipe, that connects with a duct inlet.
Also I put a breather on the valve cover, but this was touching the plastic cover of the injector wires, so I removed the cover and rerouted the wires under the manifold
- 1
-
I used a piece of the original dc2 intake pipe that goes to the resonator, that is a oval piece that goes into the airbox and changes into a round piece, and there I connect a round for the cold air.
- 1
-
thx mate
-
you visit belgium? Watch out for some horrible roads Don't know if the uk is better? Going this weekend to the uk
-
I also hope to take a look at you beautyfull aerodeck
-
steel wool and a metal polish. It was even more dirty before then in the first picture.
- 2
-
-
that would be awesome. Are you going to mimms next week?
-
yeah, that's no problem
-
4 hours ago, Chandler said:
can you arrive anytime on saturday @hondasport? or do you have to be in by a certain time?
saturday from 7am to midnight, so plenty of time @Chandler
-
from friday 7pm.
-
yeah, don't need to sign in before
-
1 hour ago, Chandler said:
looking awesome mate! you going to HEM?
yes, definitely. I go the entire weekend. You too?
-
-
This week I changed the endlinks on my rear mg arb and changed the bushings to pu versions. Also changed the bushings on the front arb to pu. Feels better now.
Also changed the mechanics of the front window, because it went very slow and when it closed it didn't stop anymore.
Got new speakers in the front, and new tweeters.
And last week my front window got replaced for a brand new.
Still need some work on the engine dressup. Heatwrap must be installed on the header, new intake piping, and fuel pressure sensor installed for my utcomp tripcomputer.
-
I think it's one piece, so no. Buy a secondhanded mirror.
-
Hi, I was wondering how dc2 recaros fit in the interior, does it take more space then the oem seats? My oem seats are rubbing the armrest, so I want to know if they take more place then the oems?
-
I think disconnect the hose on the reservoir, empty the reservoir and system by turning the steering wheel. Then connect the hose back on, fill the reservoir, and turn the wheels from left to right to bleed the system. Check the reservoir if you need to top up.
-
-
did you find any problems fitting it? think you need a diffirent throttle cable and bracket?
-
the engine bay is cleaned up and all the flocked items are done and on the car. Now it's just a few other things that has to be done to the engine bay, like securing the itr airbox and make a custome intake pipe from the airbox to the intake manifold. Here are some pictures, from hondafest in the netherlands.
- 1
-
Ringo's red mc2
in Honda Civic MA/MB/MC
Posted
resprayed the front yesterday. Some parts were not painted from the factory, so I gave it a full respray. Also mounted the black housings headlights on, rerouted the cold air pipe, and fixed the bad us lights module.