[Tyre pressure]

ok the aerodeck had 14" rims also? or doesnt care? cause the accord has a much bigger tire and 15" rims.

 

thanks mate

 

 

[Honda civic MB3 D15Z8 Cant find any visual parts.]

Hi TheAce i have one just like yours same colour and i love it  yours is a VTI while mine is i LS

 

Nice clean looking car you have there you will be in love with it im shure

 

I am from Portugal too and i reckon is not that easy to get parts, i got my headlights painted, i bought the butyl rubber(from ebay) to close the headlight after painted, but RTV silicone works too,not a hard job to do, just used an hairdryer to pry it open.

 

By the way what size rims you have? i needed to know the tyre pressure for my 175/65/r14 yours look 15"

Be safe

[Tyre pressure]

Hi there i tried to find the info for my tyre pressure everywhere but i get different opinions. At the tyre shop they said should be 2.5 BAR FRONT AND REAR, on the internet i found saying should be 2.0 bar front and 1.8-2.0 rear.

 

My car has 14" rims and the tyre size is 175/65/R14

 

I would love to know the pressure honda recommended when the car was put together buu my car as already been painted and i have no sticker on door jam so i´m lost

 

Also wanted to ask if our MB civics  have rear wheel covers on the inside wheel arc facing back, cause my rear left wheel arc seems to have a plastic cover but on the other side doesn´t, not sure where i can get one or even if its missing or not.

 

Thanks in advance

[CAR OF THE MONTH - March 2020]

Nice aerodeck, keep up the good work!

[Steering tie rod]

Nice job, awesome pictures, the sun is almost here! Got to keep strong and hope for the best, the sun always makes is comeback

 

What type of grease did you use? white lithium grease?

 

thanks

[Steering tie rod]

I need to keep the car on the road, its possible to unscrew the tie rod to check the thread size and then put it back together no problem? do i need to add loctite to the threads to re tight it properly or no need to? Do i have to be carefull not to spin the rack while im unscrewing the tie rod?

I apreciate your effort in trying to help me i hope im not beeing too much of a pain

 

 

I sended and email to autodoc and they said that i needed to buy all the rack cause they dont sell inner for my car separate.

 

Have a nice weekend my friend

[Steering tie rod]

Yeah i already bought a inner removal tool from ebay, the ones that your screw in and connect to any 3/8 drive, look like an exhaust pipe clamp type of thing.

I also find parts in autodoc but all M12x1.25 on the rack side, i would prefer to buy from autodoc or similar site  because they have warranty for 100 days no questions asked so i will try to ask them if they have those.

How can i check the compatibility for my car? any way of measure it only removing the dust boot?

 

I see some number in my inner tie rod, look like date of manufacturer, 2d09d97

my rack has a number too its 3400961LH or 34009961 LH is yours the same?

Also the outer tie rod says ST3 on top

What do you mean by stacked? mine has a hole in the rack but has nothing inside the hole i would have though its for a pin but none is there its just an empty hole that goes trough the rack/tie rod.

 

Thanks for the help much appreciated.

 

Be safe 

[Steering tie rod]

Hi there hope everyonwe is safe, i have a question in the inner tie rod in my 1997 MB3.

Is it possible to change the inner or only the outer in MB?

Does anyone know for sure wich o empart number is?

I already taked the boot off to look and i see a tiny hole in the rack/inner tie rod, but i cant figure out if its removable or not :(

thanks in advance and take care 

[MZ ZR sideskirts]

21 hours ago, WilkesyMB6 said:

I had MG ZS Skirts on my MB6 and they were a direct fit using the same fixings that were holding the original skirts on the car.

 

Hi tks for the reply, i cant really understand the difference between MG ZR an ZS models, i suppose its just some upgrades to the same car, isn't it?

 

You had MG ZS skirts from wich year? I saw here in the site a list of interchangeable parts from civic and mg but i cant understand if its only for the same year cars or not...

 

[MZ ZR sideskirts]

16 minutes ago, dmrichards said:

I know the mg zs skirts fit but I'm not sure about those. think they might be to short? 

not shure but you might be right... i ll try and ask the seller if he can measure it for me.

 

About the fittings, does the MG ZS sideskirts fit using the OEM screws/supports? or are all glued???

 

p.s:by the way, this MG is also 5 doors, the size difference might be from a visual illusion...caused by different car position and lightning in the photo

[MZ ZR sideskirts]

Hi  there, i´m new to the site, i wanted to know if the "MG ZR 2004" sideskirts will fit my honda civic VI MB3from 1997.

 

ill put a photo of the MG, i have seen this sideskirts or similar fitted in an Honda MB3 from an bulgarian guy that i found pics in the internet, is name is EmZvr mb you know his car too.

 

 

thanks in advance

 

Ricardo