jamesvti Posted December 26, 2015 Share Posted December 26, 2015 just fitted new boss and sparco steering wheel to my mb6, but im not sure on how to wire in the horn as it was all to do with the air bag wireing etc last time Quote Link to comment Share on other sites More sharing options...
civicturbo79 Posted December 28, 2015 Share Posted December 28, 2015 you will have to wire in a switch or if the air bag clock spring is still the wire of the horn wires in that Quote Link to comment Share on other sites More sharing options...
Jayhoath83 Posted December 28, 2015 Share Posted December 28, 2015 Yeah a resistor is needed to delete the air bag and you need to make an earth for the horn to work iirc Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted December 28, 2015 Share Posted December 28, 2015 I removed the clock spring. Used a non airbag boss kit for an eg. Then made a sprung wire contact that touches the back of the boss. And connected that to the horn wire.I also cut the plug off the airbag and soldered a 2 ohm resistore to it to disable the airbag light 1 Quote Link to comment Share on other sites More sharing options...
Jayhoath83 Posted December 31, 2015 Share Posted December 31, 2015 Thats the way to do it. Nice 1 jakey boi Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.