hertsguy Posted January 12, 2016 Share Posted January 12, 2016 good afternoon all, I currently have a Mc2 1.8 vti , which is 4 x 114.3, after doing some wheel research its hard work to find any thing nice/ drag width wheels. ive been looking into the possibly of using 4x100 hubs off a Ek or similar, then the discs off a mg zs to keep it to 282mm would the Ek 4x100 hubs fit straight on ? including shafts etc Thank you Quote Link to comment Share on other sites More sharing options...
Jayhoath83 Posted January 12, 2016 Share Posted January 12, 2016 Ive gotta say it why would you want 2 dude theres plenty of wheel coice in 4x114 as that the same as dc2 tegs and preludes and ive seen plenty of them with drag wheels Quote Link to comment Share on other sites More sharing options...
hertsguy Posted January 12, 2016 Author Share Posted January 12, 2016 I have done some searching and really struggled to find reasonable priced :wide 15's and also better brake up grades Quote Link to comment Share on other sites More sharing options...
dr_broon Posted January 13, 2016 Share Posted January 13, 2016 I remember @DeLaSoul was doing a hub swap for 5 stud integra hubs on his build. Don't know if that opens up more choice? Quote Link to comment Share on other sites More sharing options...
hertsguy Posted January 13, 2016 Author Share Posted January 13, 2016 ooo great ill have a look into it thanks Quote Link to comment Share on other sites More sharing options...
dr_broon Posted January 13, 2016 Share Posted January 13, 2016 Link to his build thread.. . http://civic5.com/forum/topic/3647-mc2-project-chassis-prep/page-6 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.