B18C4 rebuild with B16B piston

[civicvti]

 

Hi everyone, I am revising my B18C4 and already that candle was considering assembling the pistons of the Civic Type R B16B, some of you have already tried to mount them, I would like to know if there are problems

[noodels]

http://www.ff-squad.com/tech/temp/pistons.htm

[noodels]

http://www.isitaboat.co.uk/cars/honda_civic_type_r__ek9_/

[civicvti]

ok, as I understand pistons B16B are too high for our B18 c4, but with those of the ITR instead should go quiet

[noodels]

Just tune the C4 with a good exhaust manifold and exhaust system + breathing mods.185HP

<An inlet+cams+head that needs ecu and Mapping > £1200++ there alone 200HP

Or just use an R engine=Job done already 200HP

C4 is not the right cylinder head for the R piston design,the squish is wrong

 

Google Frankenstein Honda B series  

[civicvti]

 

Understood, the problem is that here in Italy at Honda have told me they are no longer available plus 0.25 pistons that I would need but the supplements are found, however, confirmed to me that the pistons p73 y do not go there, nemmmeno the p73a00, which I am a little more low?

[Viltor]

Hi,

You cam use the pistons from the Civic Vti b16a2 or from integra type R also. Thanks