Jump to content

Vti s rear lip fitting


kalvtec
 Share

Recommended Posts

Anyone with a vti s hatch can show a pic or explain the proper fitting of the rear lip please...

Ive fitted mine but just used the 4 screws that go on each end and im going to use black cable ties to go underneath holes cos i dont have the bolts or the plastic clips....

2 things im not sure about is there some metal brackets that go in between the bumper and the lip where it meets the arches that the screws go through.

Are these brackets supposed to be clipped in over the screw holes on the lip or the bumper it self?

Also i noticed the top of the lip where it touches the bumper has slight gap so not a tight fit...is there supposed to be some 3m double sided strip to applied across the lip on the inside?

I do have some 3m but ive read its supposed to be applied in warm weather or it wont bond...:(

Sorry for long post but rather than put another thread up i might aswell ask here if anyone has any ideas if mg zs sideskirts can be fitted without those plastic clips that are fitted on the inside?

Sadly i had mine painted then realized that all plastic clips and holders are non present as when i broke my zs earlier this year i unkowingly pulled the skirts incorrectly causing them to rip off..

 

Any help appreciated

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...