WilkesyMB6 Posted February 9, 2011 Share Posted February 9, 2011 This was meantioned by James in another thread. So i have a head unit that has loads of leads coming out of the back. Its a bit of a pain to get them all to fit down the back Im going to be taking it out soon to wrap some bits and bobs.Is the plastic bit at the back of where the head unit fits attached to the center console or the dash? As i want to cut the holes a bit bigger so the leads fit down there easier. Link to comment Share on other sites More sharing options...
johngreen537 Posted February 9, 2011 Share Posted February 9, 2011 It's attached to the dash side of things mate.Just take the radio out, then get a junior hack saw blade in there Or go OTT like I did, and use a heat knife Link to comment Share on other sites More sharing options...
WilkesyMB6 Posted February 9, 2011 Author Share Posted February 9, 2011 I have to take out the console anyway so i will see what space there is and maybe start hacking away lol.If i remember i may take some pictures! I have a few parts that i need to fit to the car, its just getting the time to do it! Link to comment Share on other sites More sharing options...
james Posted February 10, 2011 Share Posted February 10, 2011 use a heat knife Link to comment Share on other sites More sharing options...
simpo Posted February 11, 2011 Share Posted February 11, 2011 use a heat knife Link to comment Share on other sites More sharing options...
WilkesyMB6 Posted February 12, 2011 Author Share Posted February 12, 2011 I got a dremal and cut some out, think it needs a bit more though, as i have soo many leads that go down the back Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.