weetec Posted December 29, 2011 Share Posted December 29, 2011 the beauty of the M civic is its very practical, if i didnt have kids or safety wasnt a priority, id have a teg all day.just some advice on experience...... I would have the following;4-1 manifold (preferably the 2 1/2" collector. full exhaust, ddecent air intake system £? HT leads, new dizzy cap, rotor arm, tappets adjusted, fuel filter service bits etc etcP30 ECU chippeda good custom re-map,...u should be on a winnerof course theres no substitute for the modding bug, you allways want that little bit more....its contagious. Link to comment Share on other sites More sharing options...
knight Posted December 29, 2011 Share Posted December 29, 2011 the beauty of the M civic is its very practical, if i didnt have kids or safety wasnt a priority, id have a teg all day.just some advice on experience...... I would have the following;4-1 manifold (preferably the 2 1/2" collector. full exhaust, ddecent air intake system £? HT leads, new dizzy cap, rotor arm, tappets adjusted, fuel filter service bits etc etcP30 ECU chippeda good custom re-map,...u should be on a winnerof course theres no substitute for the modding bug, you allways want that little bit more....its contagious.Your right there mate! Link to comment Share on other sites More sharing options...
mb6loon Posted December 29, 2011 Author Share Posted December 29, 2011 4-1 manifold (preferably the 2 1/2" collector. check/decated as wellfull exhaust, d check powerflow i know could be betterdecent air intake system £? pipercross viper atm but have ordered a v2HT leads, new dizzy cap, rotor arm, tappets adjusted, fuel filter service bits etc etc doneP30 ECU chipped, dastec piggyback systema good custom re-map,...u should be on a winnerthanks for info though where would i get a p30 ecu from ? Link to comment Share on other sites More sharing options...
weetec Posted December 29, 2011 Share Posted December 29, 2011 the man local to you has to be scott from H-tune...i had a P30 from him. i used his base map for approx 3 months. although its not advisable to do this. personally id keep the existing inlet manifold unless your getting one mega cheap. their aint really a big gain from this in my opinion...unless your planning on different internals cams etc Link to comment Share on other sites More sharing options...
mb6loon Posted December 30, 2011 Author Share Posted December 30, 2011 if i go for the inlet i'll be close to 150 for it but u got to admint they look good also what map do u recommend to put onto it Link to comment Share on other sites More sharing options...
weetec Posted December 30, 2011 Share Posted December 30, 2011 if i go for the inlet i'll be close to 150 for it but u got to admint they look good also what map do u recommend to put onto itthats cheap they are rare, the base map just gets you about A 2 B....youll have to get it custom tuned to your car as no 2 cars are the same....for god sake make sure you mention CUSTOM MAP to your potential re-map garage...as i realised some people charge you dyno time/per hour.... a custom map should entail at least 2-3 hours work. in my case it was £300 and just under 1hrs work. Link to comment Share on other sites More sharing options...
mb6loon Posted December 30, 2011 Author Share Posted December 30, 2011 i was looking at the road tune map that h tune does would that be a better option on the p30 ? Link to comment Share on other sites More sharing options...
weetec Posted December 30, 2011 Share Posted December 30, 2011 i was looking at the road tune map that h tune does would that be a better option on the p30 ?nope..like i said thats just a base map get u from a 2 b...from another vehicle. on the base map there will also be a few sensors disabled too. personally i would stick with your own inlet and have it re-mapped to this. you would be surprised what power is available from the existing set up with a few wise selected mods......but i know you cant help your self...itching for every mod, sleepless nights, wake up with a new idea everyday...theres no replacement for "i have to do it"..its all good Link to comment Share on other sites More sharing options...
mb6loon Posted December 30, 2011 Author Share Posted December 30, 2011 lol might look at getting the dastec remapped again since theres a s/s mainfold and decat and my aem v2 is coming next week thanks for all the help guys Link to comment Share on other sites More sharing options...
weetec Posted January 9, 2012 Share Posted January 9, 2012 gotta give credit to noodles for using this smily..... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.