Braided brake lines!!

[matrix1]

I bought mine last week direct from Hel. Paid £70.

Things to note:

1.As per Weaver above, ring the contact above to order the correct lenghts.

2.You will have to use one of the original fittings for the front ones.

3. The fitting is very easy. The bleeding not so. Have used 2 litres so far and have ordered another litre. Initially my pedal was hitting the bottom. Much better now after following the advice above, but still not perfect. Will be taking it to the garage to be done. Cost £50.

[wezza9]

you have to get the integra type R brake lines thats what i have on mine

the bleading is rear then front longest line from the ABS or master cylinder just keep bleeding till the bubbles stop then go to the next and when you lock the bleed screw off stamp on the pedal to check for leaks. that what i do

as for Hel or goodridge there will not be much if any difference i do not think there can be much IMO

[sx baz]

out of interest, does the abs unit have a bleed nipple, ive had cars in the past that remain spongey until the abs unit has been bled.

[james]

the abs unit is electric ??

[sx baz]

i see, im used to older systems on other cars with big mechanical pump unit which usually holds a bit of air.

Ive not had to delve into the braking system on the civic yet so just seeing whats what from you guys, i guess you can only bleed from the calipers and the bmc then.