GreenVTi991 Posted April 26, 2012 Share Posted April 26, 2012 I've found a ZS 180 being broken local to me and would like to know the full list of parts I need to glean off it to put on my MB6!I've already got in touch with the seller and listed him the following:Front springs and shocksRear springs and shocksFront ARB + linksRear ARB + linksWhat else do I need?Is it worth enquiring about getting the steering rack too? Quote Link to comment Share on other sites More sharing options...
EmZvr Posted April 26, 2012 Share Posted April 26, 2012 Just a small hint about the side indicators. They do fit but you need them with a piece of cable which you have to solder to the old one. (The bulb base is diferent)By reading the forum I thought there are straight fit but they aren't. Now I have side indicators that can't fit becuase I don't have the wires Quote Link to comment Share on other sites More sharing options...
noodels Posted April 26, 2012 Share Posted April 26, 2012 dont bother front arband wheels dont fit Quote Link to comment Share on other sites More sharing options...
NIKH25 Posted April 26, 2012 Share Posted April 26, 2012 dont bother front arband wheels dont fit x2side skirtsside indicatorswheels, if they are the good ones.interior trim will also fit iirc.wind deflectorsdoors I'm sure there is more that fits Front seats fit I think, rears don't, also rear door cards not electric windows so don't fit either. Quote Link to comment Share on other sites More sharing options...
GreenVTi991 Posted April 26, 2012 Author Share Posted April 26, 2012 Cheers guys I should've been more specific in my first post as all I'm after is suspension bits! Quote Link to comment Share on other sites More sharing options...
GreenVTi991 Posted May 1, 2012 Author Share Posted May 1, 2012 Should hopefully have the suspension bits by the weekend. How much difference does the zs180 suspension make?Will I need the rear ARB brackets or can I use the Civic ones? I wana make sure I've got all the bits I need before tackling the changeover! Quote Link to comment Share on other sites More sharing options...
NIKH25 Posted May 1, 2012 Share Posted May 1, 2012 ZS suspension is a massive improvement over MB.The mounting brackets are the same but you'll need the drop links from the mg. Quote Link to comment Share on other sites More sharing options...
Nairnster Posted May 1, 2012 Share Posted May 1, 2012 dont bother front arband wheels dont fit x2side skirtsside indicatorswheels, if they are the good ones.interior trim will also fit iirc.wind deflectorsdoors I'm sure there is more that fits Front seats fit I think, rears don't, also rear door cards not electric windows so don't fit either.If its a ZS 180+, it should have rear electric windows as standard, as this was one of the upgraded items over the 180I know my 120+ had rear electrics whereas a standard 120 didnt. Quote Link to comment Share on other sites More sharing options...
GreenVTi991 Posted May 2, 2012 Author Share Posted May 2, 2012 A full laser alignment will need to be carried out once the MG suspension is my Civic won't it? Quote Link to comment Share on other sites More sharing options...
noodels Posted May 2, 2012 Share Posted May 2, 2012 should be ok without laser,as not affecting toe much,see how it drives tbh Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.