Jump to content

High Beam Always On!


Shaddow
 Share

Recommended Posts

Hi,

I am in need of some urgent help.

Got home tonight in the car and parked up as normal, switching headlights off and locking car. I later noticed my car's headlights were on and on full beam. I walked out unlocked the car and opened the door. The stalk was set to off and there was no "beep" from the open door to say my lights were on.

The "Blue" high beam icon on the dash was illuminated and I could not switching it off. Starting car, switching lights on and off, switching high beam on and off on the stalk but nothing.

I removed the 10A fuses from the in-car fuse box for both high and low beam, but the lights remained on. I unplugged the lights which turned them off, but the blue icon on the dash remained on and could only get it to go out by removing the battery connection.

I have HID's fitted and have had them without fault for many years. The headlights worked fine on the 1mile drive home from work today (10min before noticing lights were on after getting home).

Any advice would be greatly appreciated.

Link to comment
Share on other sites

Thanks. Ill follow all wires around today and check for melted wires or bad connections. Was just surprised it happened all of a sudden after severl years of it working fine. So I am confident the wiring is correct.

Link to comment
Share on other sites

All Sorted.

Seems it was my HID Ballast that had a fault. Disconnected and fitted some crappy standard bulbs. All good now. Ordered a new HID kit, so should have good light again soon!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...