civicturbo79 Posted December 12, 2009 Share Posted December 12, 2009 This will be 2nd project tread as im putting my car back to standard and then selling off all my mods and in the end the car .Ok My bro had a lovely vti-sWell that was until someone ran into it . The car got wrote off and my brother retained salvage , He then brought a new vti-s , So he removed all his mods and i brought the complete car off him to use as a parts car, To return mine to standard . Over this week a have removed all the panels from the car so i can sell them.Then on friday 11/12/09 after work i removed the engine and exhaust plus the rad , air con rad and all the other front end parts i needed.On to today 12/12/09 this is what the vti-s looked like when i got to work this morning .I started off by drilling off the front panel as i had to cut mine to get the turbo and the big rad in .Then i went for all the little bits and bobs ecu and dash trims and centre consol so a could remove all the gauges, vtec controller ,turbo timer and boost controller from the inside of the car . I finish off by removing the o/s/r suspension as i have sold that , so the car is now completely stripped so its off to the scrap yard for her on monday . Link to comment Share on other sites More sharing options...
DAVEMB2 Posted December 12, 2009 Share Posted December 12, 2009 this is going to be good back to standard build but sad to see your turbo go . but also glad i got to see it at m6 meet before it went good work rich Link to comment Share on other sites More sharing options...
jalesi2001 Posted December 12, 2009 Share Posted December 12, 2009 Cool, looking forward to watching this one too!! Link to comment Share on other sites More sharing options...
FlunkyVTEC Posted December 12, 2009 Share Posted December 12, 2009 It's a shame to see another VTI-S depart but al least all the good bits can still be saved. It's not every day you see a back-to-stock project . Good luck with the conversion, judging by your modlist you've got a lot of work to do. Link to comment Share on other sites More sharing options...
southwestmb6 Posted December 12, 2009 Share Posted December 12, 2009 RIP , long live the MB6 !!!!!!!!!! Link to comment Share on other sites More sharing options...
civicturbo79 Posted December 12, 2009 Author Share Posted December 12, 2009 It's a shame to see another VTI-S depart but al least all the good bits can still be saved. It's not every day you see a back-to-stock project . Good luck with the conversion, judging by your modlist you've got a lot of work to do.I have got loads to do thats for sure . Rich. Link to comment Share on other sites More sharing options...
mk1kid Posted December 12, 2009 Share Posted December 12, 2009 gutted 4 ur bro m8 tht was a clean mb6 and good luck with project standard its such a shame a mint turbo mb6 is returning to standard but understand why ur doing it Link to comment Share on other sites More sharing options...
civicturbo79 Posted December 12, 2009 Author Share Posted December 12, 2009 gutted 4 ur bro m8 tht was a clean mb6 and good luck with project standard its such a shame a mint turbo mb6 is returning to standard but understand why ur doing itHe was upset at the time but he has this one now so all is good Rich. Link to comment Share on other sites More sharing options...
mk1kid Posted December 13, 2009 Share Posted December 13, 2009 yh i like tht 1 too i take it hes a mb6 lover too lol Link to comment Share on other sites More sharing options...
SteveMB6 Posted December 13, 2009 Share Posted December 13, 2009 would you sell the bonnet? would need to be posted to n.i. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.