phill1975 Posted May 23, 2014 Share Posted May 23, 2014 I think it might have sat different on mine cause there was a home made decat on mine when I got her which may have been longer not sure but it def sat almost flush with rear. I did see a spacer on ebay but I cant find them for looking now will have another check see what I can find out Quote Link to comment Share on other sites More sharing options...
Grant Posted May 24, 2014 Share Posted May 24, 2014 Yeah that's another option, you could space out between the b pipe and the rear section. But as @Krzys said, if your going down the route of a new b pipe, you might as well hold out for that. Quote Link to comment Share on other sites More sharing options...
Mikeyvti Posted June 19, 2014 Author Share Posted June 19, 2014 I need your guys Knowledge... My old window regulator had snapped on me so i went and got another and fitted it not a problem and all worked fine but for some reason and cant get my head round it it wont send the window up perfectly straight through the window seal/guides u have to use one hand to operate window switch and your other hand to guide it up properly. Probably something simple but if i keep scratching my head over it i will be bald Quote Link to comment Share on other sites More sharing options...
Krzys Posted June 19, 2014 Share Posted June 19, 2014 Check the bolts are tight on the adjuster first, if they are and you can still move the glass then then the replacement may be worn and letting it move. I'm guessing you bought a second hand one? Quote Link to comment Share on other sites More sharing options...
Mikeyvti Posted June 19, 2014 Author Share Posted June 19, 2014 @Krzys yeah all the bolts are tight and it still has some movement, so you think i need to buy a new one to solve the problem? Quote Link to comment Share on other sites More sharing options...
Krzys Posted June 19, 2014 Share Posted June 19, 2014 @Krzys yeah all the bolts are tight and it still has some movement, so you think i need to buy a new one to solve the problem?I'd say you'll need to replace the regulator again, second hand ones are a gamble, I bought a brand new one from eBay, it killed my motor and left my window stuck half way down! Second hand are your best bet but it's 50/50 whether you get a decent one or not. Quote Link to comment Share on other sites More sharing options...
Grant Posted June 19, 2014 Share Posted June 19, 2014 I seem to remember reading in the manual that there is a way to adjust the windows tilt . . worth a read mate .. Quote Link to comment Share on other sites More sharing options...
phill1975 Posted June 20, 2014 Share Posted June 20, 2014 yeah you can adjust the tilt on the small bar at the back has a slotted hole so you can adjust it to go up straight Quote Link to comment Share on other sites More sharing options...
Mikeyvti Posted June 27, 2014 Author Share Posted June 27, 2014 cheers guys will have to look into it as its driving me mad Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.