Off the shelf Civic MB6 Decat

[Guest rallyeluke]

 Hi as above I am after an off the shelf decat pipe that will fit my MB6 civic 1.8 vti, 

 

 

It needs to be 450mm long. 

 

 

 

Before anyone says, I do not want a custom one. 

 

 

Cheers 

[Krzys]

Adjustable would be your next best option then.

[Guest rallyeluke]

See I bought an adjustable decat, that is 2.25" piping but the flange for the collecter was way to big and swamped the manifold so I cannot use it 

[Krzys]

Ah so it's got to mate up with the standard manifold has it? Custom would be easiest way to go as they'd use the flange from your CAT so it mates properly.

[Roj]

MB6 collectors are hilariously tiny. You might as well buy a new manifold (doesn't even have to be an expensive one!) and use the adjustable decat on it.

[simpo]

See I bought an adjustable decat, that is 2.25" piping but the flange for the collecter was way to big and swamped the manifold so I cannot use it

With 225 piping prob had 2.5 flange. Wasn't there and exhaust place that did them with the full system. I wanna say mongoose but don't thinks that right something like that any ways lol

[Guest rallyeluke]

yeah that is what I reckon happened buddy, would a 2.25" with normal flange fit a stock manifold? I have purchased a 2" adjustable decat now but would ideally like a 2.25" to match the piping of my toyosports exhaust

[Guest rallyeluke]

MB6 collectors are hilariously tiny. You might as well buy a new manifold (doesn't even have to be an expensive one!) and use the adjustable decat on it.

I have an uprated toyosports manifold and that is 2" collector and it is too small to go with my adjustable decat. I have bought a 2" decat now so hopefully that will work