spudley1988 Posted July 4, 2014 Share Posted July 4, 2014 Right folks need a little help as im just confusing myself here lol. I have OZ wheels from an Evo 3 GSR on my mb6 but needing centre caps, but which size? Now i was told that the centre cap had to be smaller than the centre hub bore size? So mb6 centre bore is about 56.1 and evo 67. something so which size of centre cap do you reckon i should be looking at? low 50mm's or smaller than that? Hopefully this makes sense and please help Quote Link to comment Share on other sites More sharing options...
Krzys Posted July 4, 2014 Share Posted July 4, 2014 I would have thought that you'd just need to measure the hole it needs to cover? Quote Link to comment Share on other sites More sharing options...
Grant Posted July 4, 2014 Share Posted July 4, 2014 I would have thought that you'd just need to measure the hole it needs to cover? Yeah regardless of what the centre bores are for each wheel, its the wheel thats on it that you should need to measure .. Quote Link to comment Share on other sites More sharing options...
spudley1988 Posted July 4, 2014 Author Share Posted July 4, 2014 right ill go measure a few holes and hope for the best lol Quote Link to comment Share on other sites More sharing options...
Krzys Posted July 4, 2014 Share Posted July 4, 2014 Cool! When you've done that can you fill out your user profile please mate? Ta! Quote Link to comment Share on other sites More sharing options...
Grant Posted July 4, 2014 Share Posted July 4, 2014 I know when i measured to get some for the dc2 alloys ive got, they were a right pain as some suppliers measure from the outer diametre and not the catches .. As the catches need to be slightly bigger Quote Link to comment Share on other sites More sharing options...
Grant Posted July 4, 2014 Share Posted July 4, 2014 Cool! When you've done that can you fill out your user profile please mate? Ta! Oh and get a pic up ! Quote Link to comment Share on other sites More sharing options...
spudley1988 Posted July 4, 2014 Author Share Posted July 4, 2014 outer diametre of old cap around 60mm, diametre of inside cap where the plastic bits are is around 50-52mm and inner diametre of alloy is around 48-50mm ish Quote Link to comment Share on other sites More sharing options...
Grant Posted July 4, 2014 Share Posted July 4, 2014 Thats just confusing lol ... Trial and error i suppose ... Quote Link to comment Share on other sites More sharing options...
Dave Posted July 5, 2014 Share Posted July 5, 2014 Mate it's hard finding the right size of centre cap, as was said above some companies measure them differently to others which mucks things up. Best thing to do is do what i did and contact OZ wheels direct, letting them know which design of wheel you have. I think all the centre caps for one design of wheel will be the same regardless of the centre bore, so hopefully they should be able to help you out.Try here >>>> http://www.ozracing.co.uk/contact/request_form.aspx bud and see if they can help. Dave 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.