Leaderboard

Got some from Climair installed rn, and they fit very well. They're still available brand new. Only thing I had to do is grind off a bit of the holding tab in the front (was a bit too long) but that's completely normal with these things. And you can even choose between clear, tinted, and dark, which I find quite nice.

Small update on the whole brake prop valve situation: Apparently, EG6 prop valves could also work, as they don't have ABS and 262/242mm rotors in the front and rear, just like our M-chassis Civics. So, if that's true, you could get a brand new valve for less than $200 from Japan. Part number for these bad boys is 46210-SR3-013 And you should be fine sticking with your original brake master cylinder + booster! But if you've got 242mm discs all around instead you'd need a "1725" valve (46210-1725-XXX) off a Del Sol, not off an EE/ED/EF Civic! (Different f/r rotor sizes)

I started out with the heko ones, but then got a set of the Climair ones, which are a bit better.