DAVEMB2

Ok some more new updates so so should of been doing house lots of work to do on it but while had no rain got to work on trin2 1 mod standard aeriel so went from this then cut and fied to this 2 fitted my oil dip thingy on bracket 3 then i fitted my new plugs and leads so bay looks a little cleaner and blue 4 after all that and this took time few hours to get clean i took badges what a get to get it all off but now

well my mb3 (trin2) is only for day to day and work so it has no chance up against your mb6's .but when mb2( trinity) is reborn i will but her up

yer blames your right had it ages ago and forgot all about it .Checked my oil other day had no rag then i rembered i had one for trinity(mb2 on its way) so went looking for where i put it ,in a safe place arrrrrrrrrrrrrrrrrr they are handy so going to fix it in engine bay no more rag

Ok just a little mod to go on at weekend

n ice one keep the pics coming

here is a pic of my ini that i took off. yes accord should fit .

they look the same as i have how do they not fit ?

yep no prob

thats a s---- u would think your mc is the same as the mb are they that diff in the side indi's

the link is in the how too heater but here it is http://www.rezpax.com/

yes got it from the link and the side indi's black will look nice and mine fit so well i would not like to take them off

behind your glove box and you will see a plug on top of fan unplug it unsrew 2 srews and lift out .

you have five speed's if not working 123 it prob is look on how too that say's how to take it out and you will see like mine its very easy to take out

Ok not a mod realy but for the past few months heat only working on 3 and 4 so out the res pack came you can clear see y . so i order the res coil pack ect alot for cleaning and resoldering and bob's your uncle well may not be bob could be jim or peter or dave you get the point . now they work

ep82 Yer no prob i got mine from demon tweeks would think you can get it from a few good car shops . its not that cheap crapy pipe you can get , they do 3 types from 25mm dai upto 203mm dai . cheapest is black single layer neoprene -50 +200 c , then brown (thats what i used) single layer silicone -80 +310 c ,and silver daul layer silicone -80 +310 c its by revotec. hope thats some help.

Its an akr brace . Not that this car realy needs it for day to day but gives the bay nice look and it may help . All so have up next some DENSO iridium spark plugs to go in. Think i will do that when i give her next oil change.

OK another small update nice blue strut ..........................

EP82 T ry here http://cgi.ebay.co.uk/HONDA-CIVIC-CRYST ... 286.c0.m14

O forgot then got indicators off ebay going to get more for trinity (mb2 epic build ). i like them had clear but think the crystal black are nice and a bit diff

EP82 I take it you have a/c so you will prob not get the intake where i have it .But if you are after just noise take all the res box out and see how you like the sound .Just doing this will give u a nice drone under the bonnet. And you will feel the diff aswell ,thats what i got now i have the full intake it is not as loud but i do get a nice sort of sucking whisle noise from the front bumper. But i was not looking for noise now it picks up realy well low down (over stock i mean its no nsx lol ). a short ram with foam cone filter may get you the roar but you may loose some power doing it ( thats not a fact by the way ).

Ok new update it is now running a full cold air intake right in to box with k&n panel filter so here are a few bits used trip down to bq for some and some silicone duct hose not from bq lol and after a bit of work it fit nice here have lots of pics on how i did it so if any one wants me to put up a how to let me no. its not hard to done anyway . more to come god was not going to do much to it need to save for big project O and on the bum dyno it say yes ...................................................

see what i can do, another view of exhaust cold air feed next

Ok some more updates now have on my mongoose so sounding sweet looking beter and adds a little more get up and go . and while on it got rid of orange side indi's and put on some crystal black

yer arm rest came out good spayed the switchs silver but had to use my switch rover wire and plug diff. as for the k&n i would say yes i makes a diference not big but the car just feels that bit beter hard to put your finger on it . going to run in a cold air feed in so it gets a sort of ram efect. some clear side repeaters to come and debadge the back a good claying and some other little bits tomoz all being well have pics up end of week i hope .

Ok so i have had time to do a little more so i ripped air intake out. Did this without taking off bumper just took srews(clips ). and bent inner wheel lining back just enought to get at srews and to pull it out. And the car was not jacked and wheel stayed on, A pain but can be done this way... just need to work on a cold feed Also had armrest off rover 400/45 sprayed all black coz it was a dark grey. Added momo gear knob and fitted cheap head uint (has sd card reader) some spoon socks mugen look oil cap it's not bent just the pic lol more to do this week so keep an eye on