DAVEMB2
-
Posts
3,727 -
Joined
-
Last visited
-
Days Won
6
Content Type
Store
Calendar
Forums
Gallery
Downloads
Everything posted by DAVEMB2
-
i think you mean is it dificult to change side repeaters ? no very easy just push or pull them towards the front of the car and should pop out
-
rear shelf made for mdf thik it is 18mm thick some good 6x9 and a few bits from maplin . got the shelf pre done a while ago can not remember where ,it was for a rover 400 . its a stelf shelf pre cut holes for 6x9 then got plastic box , gold binning post from maplin ,and some good speaker cable sound 100 times beter . o and coz it sit on 18mm mdf no pannel vibe 1"£££$££"!!
-
its hard to say if it would or not aki i got mine from akr performance and coz i did not look at it for a year it was out a little and had to mod it with a few little bends
-
just can not stop new grill to come just putting last 2 coats to it
-
Ok here is a new update its the vti front lip (was red well sort of red got this off dave at the bday ) so it is now a nice mat black to go with my black silver and blue theme . it is not on yet needs another coat and a clear coat or 2 just put it on so you can all see
-
just got these in post to day
-
just to say thanks to dave for the vti front lip that will be going on as soon as it is painted and have time 1"£££$££"!!
-
just a few pics for car of the month
-
ok munkyjack here are the rear lights rev lights brake lights indi lights well hazards there you hope you like
-
nice dave and dawn i bet she smiles *(*(*!!% *(*(*!!% *(*(*!!% *(*(*!!% bet thats you dawn
-
nice one get some more pics up 1"£££$££"!! now no driving fast
-
Tanks dave it looks so much better cut short 1"£££$££"!! she looking nice try the aero blades like i have they look well better and work realy well better if you put rain x on aswell
-
will do tomoz or monday i will get a shot for you
-
yer still mulling that one yes it would look good but do not want to drill holes in and everyone goes that route . try to keep it a bit diff ,but that said watch this space thinking of front lip so if anyone got a vti-s lip yes and if it is in black the better
-
the strut i got from akr performance had for mb2 and never looked at it . so when i came to fit it it was a bit out (should of had an idea coz on the sticker on the strut it said 95-coup ) so may have sent the wrong one but that was a year ago and never took it out of bag . that said it was only 3-6mm out so a bit of bending and tweaking and jobs a good one . got the front one from there and no real prob with that . 1"£££$££"!! 1"£££$££"!! 1"£££$££"!!
-
Ok here she is her new look still the odd bit to done but this is here new look for birthday strut in with 6x9's new blades all round winddeflectors back down to 15" td pro race 1.2 ,with toyo t1r's make a whole 1000% better to drive light wheel i think is a must love them and lower on koni strt yes it does sit 20mm higher at back may have to look into it but everyone who has them has same prob . run them as they are for now not air in the toyo filled with nitrogen and had a 4 wheel alignment black lightweight alloy wheel nuts tooo yes drums need paint will get round to it but not before bday
-
depends on the quality of the tint but mask off what you do not want to spray .i masked off the reflector with a strip then spray like you would a bumper ect .just spray a light coat over one at a time and build it up to the shade you want do not rush it or try to put to much on . then when you have what you want let it dry hard i left mine in house near rads for a week ( got the ma lights so did not have to rush to replace them ). when it is dry i spayed it with a few coats of clear coat and let that harden . looks good but be careful you can make a mess . or you could find some on ebay that have had this done but may cost a bit but will have a good finish
-
it is a cat back system not just back box . it is a mongoose 3.5" slash cut cat back think they are about £300-£400 depends on where you get it from nice kit
-
Ok day off so start to give trin2 new look for bday so started at rear took the lot out as you can see then i fitted rear upper strut, now yes it is red this was for trinity(mb2). never looked at it for a year so did not know if it would fit mm it needed a little bit of modding . the holes was fine but it did not run across and there is no metal to drill a new hole to get the right angle it was about 4-6mm out so a bit of careful bending and job a good one that done now my new modded rear lights now these are the pre facelift ones ma look so no amber bulb in these tinited to make it work next some winddefectors to go on tomoz hopefuly 1"£££$££"!!
-
Ok just a few little mods you can see for now just got these 1"£££$££"! more to come
-
the strut is from akr performance and they do a polished one
-
Dave you should see her at bday all being well . not started her few new mods till this weekend its only a day to day car for work and that ( well thats gone out of window just can not help myself 1"£££$££"!! ).. and tinity(my mb2) will be a bit longer in the making
-
very nice and very clean toooooooooooo keep us updated 1"£££$££"!!
-
ok trin2 is going to have a new look in next few weeks for c5's birthday. took me a bit to save want it for xmass but pics will be up so if not at bday you can all see 1"£££$££"!!
-
sweet nice to see lower m's modded
