wezza9

is there no way of getting stuff recoded ????

ok think it maybe the ingnition barrel so what do i do now with it being a coded key barrel alarm imobliser etc any help or idea ????? i think its that cause when i put the key too the position before start no lights a bit of jigging about it will run

I have a slight starting problem . when i go to start the car it fires up but does not catch it takes about 3 or 4 goes but runs fine it does not cut out at junctions etc . it does this when cold and warm any ideas ?? is it the dreaded dizzy breaking down ?

yer i am running them they have boxes of spigot rings but need the wheels and car there they had to tweek them a little to fit i think it was £18

Hi i have the volvo BBS wheels ( can not still post pic for some reason ) i took my car to an after market wheel place buy me called http://www.pembertontyres.co.uk/ He sorted them out for me . I know there not close for you but its what i did .As for the wheel bolts go to the scrap yard wheel blots are normally dirt cheap .Do not go for the alloy ones they strip too easy from my exp but they do look good ps; what did you pay for your wheels ?

i have two sets of ITR i run so there is no difference. One on the road " hamp " One for trackdays " mintex "

make sure you get the lines for a DC2 or they will not fit edit : sorry thats for GOODRIDGE not 100% sure but think HEL is the same

and these cars are very good at control just the gear box that lets them down on track needs a 6 speed box ( teg 1 to 5 and then our 5th ) lol sorry off topic do thouse bits 1st unless some cheap bits come up i guess but you need very good pads a mate did a set of nasty cheap pads in 2 sessions at oulton park down to the metal in an mr2 and his brakes where fading after 4 laps so good pads and tyres toyo 888s ( med ,hard ) RSR see what is on ebay

this is what i would do and i have done most of these on my MB6 service 1ST ( & check all bushes in the suspension ) MGzs dampers, MG arb eibach springs, skim disks ( or new disks ) good pads esp for the ring u will need some thing like DS3000 or mintex 1155 or F stuff please not fast road they will go off too quick on the ring ( add some ducting if you can to front disks ) new brake fluid ( braided lines if poss ( itr lines )) brake stopper geo set tyres ( go for 15" more feel and you can get them cheaper so can get 4 ) i run toyo take weight out for the trip well back seats then braces as in lower front H brace, rear strut and C piller any cash left then itr air box and exhaust with decat NO POINT IN POWER WITH OUT CONTROL if you do it right you will under cut and out brake other stuff ps i did hear from a lad who had the MGZS that rover and eibach devloped the std springs and dampers at the ring i do not know how true that is but they are better so who knows

they are jamex one not sure if linear ? also not sure where the mg spring are at the min so may have too buy rears if konis not worth it or will not fit

i have been offered a brand new set of koni dampers and springs never been fitted they have adjustable platforms and they have top damper adjustment for £250 ono the front has the part number 8041 1152SPD55 the rear has the part number SPD 55 they are the only markings what i would like help on is will they fit my MB6 ( the fella is selling them for a civic and crx he does not hav more info at the min ) and are they any good i have MGZS suspension with lowered springs but i really need the back end a bit higher due too weight so these would be good and the car is tracked the odd time i know some people have had the koni dampers but think they where fixed so i am a bit as too what too do

you have to get the integra type R brake lines thats what i have on mine the bleading is rear then front longest line from the ABS or master cylinder just keep bleeding till the bubbles stop then go to the next and when you lock the bleed screw off stamp on the pedal to check for leaks. that what i do as for Hel or goodridge there will not be much if any difference i do not think there can be much IMO

£25 good buy that why can i never get deals like that when i NEED some thing lol it will be very loud you may have to get another box fitted so be ready mine has 2 and thinking of fitting one where my cat was too the manifold looks like a std one with the upper heat shield off

i have the same air intake i think the alloy is the same what does your air filter have writen on it ?

sorry little hi jack i have the team hekko and i just thought it was my set that where not much good will have too get the climar ones if there better one of my back ones drops at the back edge and they pop out from the rubber if windows are moved was ok in winter and spring i just put air con on but new set needed hi jack over pic of inside would be good what door cards did u put on then ??