VTISmichael

Cheers craig, i like it alot just need to do the other one. Got a universal tacho that goes 9k on the way, did a test fit of the seat, its going to have to go on the original cross sections which makes a bit high for my liking but if i put it in the dip it sits right to the steering wheel too much and i want it central as possible!

Decided to pull the front wings out to cover the tyres, the bottom cuved bit was rotten anyway so i chopped that lol made a ally bracket, looks gd im happy! Ordered an arch roller will try to roll the rear see what happens, i was going to chop the lip off anyway all fun and oh i bought a bucket seat from ebay for £30!!!!

Bought some more braided pipe and clamps today, cut and fit all the pipe work, had to muscle some of the new pipes at the back of the engine real pain, managed to get time to give a start, didnt start well as i saw some fluid sputtler up, somehow the main fuel hose had a split in it!? Fixed that and it started again...wont run on idle but does run with some gas, few more little bits to do, cut and weld a ally boss on for the monster bov and small nipple for the hks sender unit pipe(might be the reason it ran like crap and the tune is now sort of wrong). The pipe to the maf was the wrong angle ordered a 90 bend now. Trying to orgernise a remap session for her with the original tuner, probaby going to have to trailer it up there, bit of pain but will be worth it im told!

Manifold bolted, wastegate pipe on, almost all the pipes on, turbo on with wrapped downpipe. I noticed it twisted the turbo to one side so going to loosin it all up again and re-adjust. Not long now! I seriously need to sort the setting on my phone, this first pic is 4mb!

Did the bracket to hold the clock cluster, rear fog and hazard light switches came out alright. Also got 1 bucket seat on the way this week that will take some fettling to fit will seee..

Downpipe tacked, all the hoses came and massive turbosmart megasonic lol!!

95% tacked the turbo downpipe, what a pain! had to cut,tack & fit. cut,tack & fit. cut,tack & fit lol Ordered a load of ally pipe with angles and silicone joiners for the fmic. Should be the last bits, my account doesnt like me anymore lol

Tial 38mm external wastegate exit pipe

Made a stainless steel 316 exhaust flange!

Update Got most of my parts now, tacked up the wastegate pipe last night, got all my banjoo fittings just waiting for braided pipe. Looking good!

Arches came! Already modified the rear one soon the drivers one. Think i will have to make up some brackets to bolt these thing to the body! Also picked up some mikita aluminium jigsaw blades

Best thing invented since the hammar haha!

Decided to remove the dash, made a bracket so far for the heating controls

Thanks guys, trying to decide if i should make the front diffuser out of ply or metal, just the idea of wood on a car irritates me lol