10000rpm
-
Posts
940 -
Joined
-
Last visited
-
Days Won
5
Content Type
Store
Calendar
Forums
Gallery
Downloads
Posts posted by 10000rpm
-
-
22 hours ago, KiNK43 said:
Looks amazing. Big fan of is 200.
Thanks mate definitely a good drive just a little under powered
-
On 7 May 2016 at 4:46 PM, Dave said:
She looks bang on the money Naz! New wheels look so much better, and looking forward to the new parts getting fitted. Booooooost!
Thanks Dave fitting alloys was a bit of a pain but end result was worth it
-
Its wasn't long before this was gonna happen
Comments welcome
-
2
-
-
Ordered a new set of alloys 18" et35 9j
New rubber
Tires fitted
Test fitting time to roll the arches
Alloys fitted
More to come
-
2
-
-
Time for another update
Decided to do another set of headlights also fitted carbon eye brows
Wanted to improve the handling so decided to get some coilovers
Coilovers fitted
Got hold of a vortex roof spoiler
Few pictures
More to come
-
8 hours ago, KiNK43 said:
Wow looking cool. Slap an s80 on and you'd barely notice the difference I recon. Good buy that. Nice history.
S80 will make a difference but the type R engine is in a totally different league you can't compare 2 c4 doesn't even come close to it.
-
As a few of you no I have a Is200 for a daily driver this was supposed to be left stock obviously this did not happen.
Don't it have many pictures due to losing most of them
Spec will be added soon
What it looked like when I first got it ( lowering springs fitted )
Following was done
Full respray in evo 9 blue
Angel eyes with smoked headlights
Cree lights
LSD
TRD badge on front
TRD sideskirts
TRD rear lip
Arm rest
Few more changes were made
18" aero alloys fitted
Rear roof visor
Fogs done yellow
more to come soon
-
Yeah they are the new style of shocks Meisterr now offer.
Think the adjuster rings are also a little different from the old ones.
-
A couple of pics with the summer wheels back on.
Also fitted some ARP extended wheel studs.
-
If it's a non OE item it will look a lot different.
-
You could pump the pedal with engine off and once you have solid pedal, keep the pedal pressed and start the car.
The pedal should only travel so far and then stop.
-
Makes a very notable difference , good mod to carry out as well as the air box.
-
1
-
-
2 hours ago, Chandler said:
nice mate, what spoiler is that from?
Its custom made mate welded sheet metal and shaped it accordingly.
-
1
-
-
Maybe a little late, but just get some genuine Honda ones mate, hard race are too stiff and cannot compensate for movement.
-
2
-
-
Thanks for all the positive comments guys.
As a lot of you may know I made a custom rear roof spoiler which was subtle and small.
It has been a week or two working on the new one in free time, not finished completely but you get the picture.
-
1
-
-
That does tie in rather nicely.
looks like a decent finish too.
-
1
-
-
That sure does sound like a HKS SSQV BOV, have you found the original BOV?
A recirculating valve would be very quite, maybe unnoticeable depending on style. @UnicyclingTom
-
1
-
-
Wanted to change colour of rocker cover to something a little more catchy so shaved and sprayed it in electric blue pearl.
Also replaced the 5zigen exhaust manifold with a Toda V2 replica.
Also made a piston head oil dipstick.
-
4
-
-
21 hours ago, Grant said:
Looks tidy that .. You have them both sides?!
Only need the one mate the damper is strong enough.
I did make them for both sides, then removed the passenger side.
-
2
-
-
That looks epic mate, looks a real good one too.
Very quick estate which you don't really see.
Awesome buy dude.
-
I know on some models the wiring goes through a rubber Bing which pushes in to the floor.
If you get a flat screwdriver under the rubber and pop it off you should be able to wiggle the wiring so the connector comes out, then it's just a case of disconnecting.
hope that's of some help.
-
Thanks for all the comments.
I wanted to get a set of bonnet dampers/lifters but all the sets I looked at restricted the height, only allowing the bonnet to open to the half way point.
so I fabricated a bracket from steel and used a aerodeck tailgate damper and got it all installed.
-
2
-
-
Just thought I would update the little bits and bobs I have done to the aerodeck.
Made a custom carbon fibre speedometer surround, blocked off any warnings not being used and got it all installed pics below.
Will upload other mods soon.
-
3
-
-
That lexus is just stunning! If tegs getting broken pm price for gbox
Thanks mate. Box is going with engine sorry
Speed Equips Lexus Is400 BIG UPDATE 1UZFE V8 :-) ( Update 22/10/2016 )
in Other cars
Posted
Definitely I did test drive the rs200 but didnt really shift. I was gonna fit the turbo this month but ended up selling the kit got better plans soon to be updated
LoL I would have needed one of them but I have sold the turbo kit got better plans update to come soon