hondan Posted May 21, 2015 Share Posted May 21, 2015 Hi gents,I can't take the straight pipe anymore! I've been offered a full system he claims is off mb6 so I'm hoping it will fit my mb3.Does this look like an mb6 system route (backbox on right) Quote Link to comment Share on other sites More sharing options...
Grant Posted May 21, 2015 Share Posted May 21, 2015 Not sure if im honest mate .. I'd almost say the kink that goes over the rear arms isnt sharp enough .. Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted May 21, 2015 Share Posted May 21, 2015 Yeah the back section looks weird like it buckled or summit. Defo a civic center. Quote Link to comment Share on other sites More sharing options...
hondan Posted May 21, 2015 Author Share Posted May 21, 2015 Yeah it does have quite a kink you're right, good eyes!Maybe il stop being a cheap skate and get a system made up. Don't want to end up with another bodge zorst 1 Quote Link to comment Share on other sites More sharing options...
Trix Posted May 21, 2015 Share Posted May 21, 2015 if you just want a decent cat back system toyosports do a fairly good one for an mb6 that fits really well and its cheaper than having one made up... also it was cheaper to buy it from them off ebay than going to their website directly for sum reason Quote Link to comment Share on other sites More sharing options...
Trix Posted May 21, 2015 Share Posted May 21, 2015 ...however im no expert and i dont know if an mb6 system would fit an mb3. but im sure one of these guys on here will know Quote Link to comment Share on other sites More sharing options...
LJMasey Posted May 28, 2015 Share Posted May 28, 2015 not 100% but im sure from catback all mb models will have the same routing system as there all on the same chassis so mounting points for the rubber hangers should be the same and also the routing of the rear section over the rear axle may be slightly different due to design of the silencer but i would expect them to fit 1 Quote Link to comment Share on other sites More sharing options...
spudley1988 Posted May 28, 2015 Share Posted May 28, 2015 My mb6 system went onto an mb2 so dont see why one woudlnt fit onto an mb3. Quote Link to comment Share on other sites More sharing options...
Ryan6926 Posted May 28, 2015 Share Posted May 28, 2015 It won't fit an MB3 as in the MB3 the cat is in the manifold not underneath the car, I believe you should be able to get a MB6 decat to make it the same length although it'd be far less hassle to just get a custom one madeYou SHOULD be able to make it fit although the MB6 diameter of pipe is bigger so you'd need a reducer, In terms of the shape of the car, It'll work but you'd need to do as I mentioned above, It can be done but it's a pain in the arse, Another option I THINK fits is the EJ saloon with a EG decat to extend it if it's not from a 1.5 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.