james Posted July 19, 2010 Share Posted July 19, 2010 ok blams found ithttp://cgi.ebay.co.uk/TEGIWA-Shifter-Ex ... 585wt_1114 Link to comment Share on other sites More sharing options...
GB. Posted July 25, 2010 Share Posted July 25, 2010 Going back to that C pillar brace,you say you had to take a nut off the end,is that one end or both? If it was one was thinking of taking both off then shortening a fraction and using half nuts??Well ones been ordered now so we'll soon find out Link to comment Share on other sites More sharing options...
james Posted July 25, 2010 Share Posted July 25, 2010 good think man l8t know how it goes Link to comment Share on other sites More sharing options...
BLAMES-VTi Posted July 25, 2010 Author Share Posted July 25, 2010 Going back to that C pillar brace,you say you had to take a nut off the end,is that one end or both? If it was one was thinking of taking both off then shortening a fraction and using half nuts??Well ones been ordered now so we'll soon find out Yes you can take both off and then get some smaller nuts, but i was too eager to fit it! maybe in the future when i can bother cleaning up the cut lines, and sorting out the nuts, but its not really noticable Link to comment Share on other sites More sharing options...
BLAMES-VTi Posted July 30, 2010 Author Share Posted July 30, 2010 Well tried to fit the ASR brace........and........FAILED! Brace was a tad long, which meant the subframe bolts would go in on one side and not on the other and also the subframe was abit different , so im sorry to say the DC2/EG one does not fit! BUT!! This is a big BUT! i might have found a solution for the anti roll bar! Will probably take a few more days before i let you know if this works as i dont want to get my hopes up on this Link to comment Share on other sites More sharing options...
mc2vtimatt Posted August 2, 2010 Share Posted August 2, 2010 That is some epic mods, 10/10 for persistence. I really like the fact you kept the interior habitable, but have a killer suspension set up, must confuse a lot of people seeing a ' Rover' disappearing off round the bends at rapid rate of knots Well done. Link to comment Share on other sites More sharing options...
beastgtir Posted August 2, 2010 Share Posted August 2, 2010 Coming along nicely, some nice mods and good to see you are doing most of the work yourself Link to comment Share on other sites More sharing options...
BLAMES-VTi Posted August 6, 2010 Author Share Posted August 6, 2010 Thanks for comments guys!Had a go at fitting a 24mm DC2 whiteline anti roll bar today and failed miserably again! spent a good 1-2 hrs getting a sezied bolt of the MG one only to find the DC2 one abit too long lentgh wise and too short height wise. so for people thinking about the DC2 anti roll bar, you can forget about it it jsut doesnt fit!Looks like im out of ideas for the suspension now any ideas people?? Link to comment Share on other sites More sharing options...
GB. Posted August 7, 2010 Share Posted August 7, 2010 Sorry Blame but I`ve copied your C-piller fitment but I hope you forgive me real noticeable difference, good mod.Do you have a brace across the rear top shock mounts and if so what's it off? Link to comment Share on other sites More sharing options...
nova2fit4u Posted August 7, 2010 Share Posted August 7, 2010 Gb me 3 lol and blames dont think nothing else you can do it just give up ....have you added front upper strut brace for the suspension not chasis?? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.