I just picked up anther aerodeck & it has a mirriad of little issues, I'm sure I'll be asking about a few other things.
But it has a substantial problem with water getting into the rear tyre well as well as the under the rear seats.
I've made a start by checking & clearing the sunroof drains, boy are the rear ones a pain to get at, the plastics on the end spout that exits behind the rear wheels have hardened a bit, so I had to get in behind the rear boot compartments either side behind the carpeting & make sure they were clear that way, 1 done one to go.
I don't think the water is coming in through the rear window seals but I am concerned about it coming in round the tail lights, I have tried youtube / google & searches on the forum but am coming up empty, from what I can tell the aerodeck/Mc's & MB's do not have a foam seal on the back of the light clusters like many of the other civics do, so my question is - how in the heck do I create some kind of seal behind the rear light lenze units (pictured) to create a seal & prevent water getting in through them? I'm sure many have had the same issue as it's a very common problem with the decks.
Luckily no wet carpets in the other usual places in the front footwells or anywhere else that I can tell.
I'm also like many from my reading on here struggling to get the tail lights out, I know it's just the 2 screws on the inside & then wiggle, but I am scared as hell of breaking something as they don't seem to want to come out freely, the image included are from a previous car which I have as spares.
I don't really want to go putting silicone on them as it will make bulb replacing impossible in future.
Question
frunkster
Hi all
I just picked up anther aerodeck & it has a mirriad of little issues, I'm sure I'll be asking about a few other things.
But it has a substantial problem with water getting into the rear tyre well as well as the under the rear seats.
I've made a start by checking & clearing the sunroof drains, boy are the rear ones a pain to get at, the plastics on the end spout that exits behind the rear wheels have hardened a bit, so I had to get in behind the rear boot compartments either side behind the carpeting & make sure they were clear that way, 1 done one to go.
I don't think the water is coming in through the rear window seals but I am concerned about it coming in round the tail lights, I have tried youtube / google & searches on the forum but am coming up empty, from what I can tell the aerodeck/Mc's & MB's do not have a foam seal on the back of the light clusters like many of the other civics do, so my question is - how in the heck do I create some kind of seal behind the rear light lenze units (pictured) to create a seal & prevent water getting in through them? I'm sure many have had the same issue as it's a very common problem with the decks.
Luckily no wet carpets in the other usual places in the front footwells or anywhere else that I can tell.
I'm also like many from my reading on here struggling to get the tail lights out, I know it's just the 2 screws on the inside & then wiggle, but I am scared as hell of breaking something as they don't seem to want to come out freely, the image included are from a previous car which I have as spares.
I don't really want to go putting silicone on them as it will make bulb replacing impossible in future.
Link to comment
Share on other sites
12 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.