Sega Posted July 28, 2009 Share Posted July 28, 2009 I cant make up my mind to colour code the bottom lip of my new bumper or leave it as it is. Painting it will match it to the side skirts if I buy some new ones or colour code the stock ones, but then a gain it looks a little like a after market front spoiler unpainted and of course no one makes one in my Budget to fit an MA.What do you guys think I should do? Im going for the road going racer look where funds allow it. Link to comment Share on other sites More sharing options...
jalesi2001 Posted July 29, 2009 Share Posted July 29, 2009 Colour coded has gotta be better aint it?!! Can you post a pic so we can have a look at exactly what you mean?! Link to comment Share on other sites More sharing options...
Sega Posted July 29, 2009 Author Share Posted July 29, 2009 I will do when I finish sorting out the rest of it, just waiting for paint. Link to comment Share on other sites More sharing options...
Dave Posted August 1, 2009 Share Posted August 1, 2009 Think what he means is the whole bumper is colour coded, except for the bit right at the bottom (looks like a seperate lip, but is actually an integral part of the bumper)If you look at mine, imagine the bit outlined in yellow being black [attachment=0]bumper outlined lip.JPG[/attachment]Personally, i'd colourcode it Link to comment Share on other sites More sharing options...
Sega Posted August 1, 2009 Author Share Posted August 1, 2009 I think I might do it afterall, just need to get the plastic smooth and free from gouges. Ill get on it as soon as the weather stops soaking every thing. Link to comment Share on other sites More sharing options...
Dave Posted August 1, 2009 Share Posted August 1, 2009 Looks coded, but then im biased! lol Link to comment Share on other sites More sharing options...
jalesi2001 Posted August 1, 2009 Share Posted August 1, 2009 I see what you mean now!! Yeah, i agree, colour code it!! Link to comment Share on other sites More sharing options...
Sega Posted August 1, 2009 Author Share Posted August 1, 2009 Half way through it, its taking a while as Halfords primer is absolute crap Link to comment Share on other sites More sharing options...
G Unit Posted August 1, 2009 Share Posted August 1, 2009 id colour code it unless you can get it in carbon fibre ! Link to comment Share on other sites More sharing options...
Sega Posted August 1, 2009 Author Share Posted August 1, 2009 No chance of that atm, Ive now been set back as one of my parents threw it on the floor so they could make sure their precious tumple dryer was fine, resulting in the repair breaking Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.