civicturbo79 Posted March 18, 2011 Share Posted March 18, 2011 I have never had one but it look nice . Rich. Link to comment Share on other sites More sharing options...
shebabby Posted March 19, 2011 Author Share Posted March 19, 2011 i know its too late now anyway iv already orderd it hope it comes soon as i dont realy want to drive too long with mine on as its slightly buckled aswel as cracked Link to comment Share on other sites More sharing options...
noodels Posted March 19, 2011 Share Posted March 19, 2011 dont know if this the way to be honest, they have no damping!!!so b****rs up oil pump?what i have read !! sorry :!:should see hp +though!!hope it lasts mate ps google it harmonic dampers for b series race spec ect http://www.atiracing.com/products/dampe ... mhonda.htm Link to comment Share on other sites More sharing options...
shebabby Posted March 19, 2011 Author Share Posted March 19, 2011 wot do you mean by oil pump ?the crank pump or the power steering pump ?im thinking about taking the a/c belt off as it doesnt work and dont use it anyway !plus the pully weighs next to nothing !!! Link to comment Share on other sites More sharing options...
noodels Posted March 19, 2011 Share Posted March 19, 2011 engine oil pump, but dont take my word for it go ahead mate and fit!!controversy again Link to comment Share on other sites More sharing options...
shebabby Posted March 29, 2011 Author Share Posted March 29, 2011 ok finally the tegiwa pully came today fitted it earlyer and had to put my own timming marks on it and change the belts as the standerd belts were to big with the pully been smaller !!been out in her tonight and niticed the revs ar more responsive and yes feels like more power but havnt tried it properly yet you can notice it more on uptake from idle more instantanias Link to comment Share on other sites More sharing options...
cal Posted March 29, 2011 Share Posted March 29, 2011 one bloke on a forum im a member of fitted a pulley like that. because the pulley is solid and has no vibration dampening it snapped his crank while on a race.a lot of these are not properly balanced. Link to comment Share on other sites More sharing options...
shebabby Posted March 29, 2011 Author Share Posted March 29, 2011 one bloke on a forum im a member of fitted a pulley like that. because the pulley is solid and has no vibration dampening it snapped his crank while on a race.a lot of these are not properly balanced.i get where your coming from mate but if you had seen my oem pully wobble after i cracked it youd realise anything was better i tried to get a genuin but couldnt find one plus honda wanted £343 for a new one Link to comment Share on other sites More sharing options...
jonnyricer Posted March 30, 2011 Share Posted March 30, 2011 how can it snap a crank blimey its only turning the alternator power steering and air con surely the the fly wheel side is the most stressed part??? Link to comment Share on other sites More sharing options...
cal Posted March 30, 2011 Share Posted March 30, 2011 how can it snap a crank blimey its only turning the alternator power steering and air con surely the the fly wheel side is the most stressed part???because the stock crank pulley has a damper built into it. a rubber piece if you will that stops vibration through the crank.its called harmonics. if you look for a top notch aftermarket pulley you will see the difference. i.e fluid ampar's i think one brand is.those alloy ones dont deal with the vibration. next time you get chance have a look at your stock pulley Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.