harVTEC Posted April 4, 2011 Share Posted April 4, 2011 Hi,I discovered that I have got the optional passenger seat tray, I think it's a good little gadget which I will use to stick my school books in However, I noticed it was a bit stiff, when I pulled it out it was apparent that one of the 'runners' that the tray slides in and out on is bent badly, but the metal is I think over-built, so bending it back will be a lot of effort.Does anyone know of where you can get replacement runners?Thanks in advance.harVTEC Link to comment Share on other sites More sharing options...
WilkesyMB6 Posted January 18, 2013 Share Posted January 18, 2013 Thread from the dead, and I know you now have a Jordan.This week I got one of these trays and am having the same problem. If it wasn't snowing I would try and bend the rails a bit. I didn't realise it was an option extra though. As most VTi owners say they have them, i didn't even know about them until a few months ago. Link to comment Share on other sites More sharing options...
fyfie5 Posted January 19, 2013 Share Posted January 19, 2013 i have one also with the vti interior i put in and it was a bit stiff aswell might have to have a look at the rails now. Link to comment Share on other sites More sharing options...
philgor Posted February 3, 2013 Share Posted February 3, 2013 well both my mb1 ls and vti aerodeck they both had tray's under the passenger seat, also the few civic "M" i've been in, have also had the tray under the passenger seat. Link to comment Share on other sites More sharing options...
WilkesyMB6 Posted February 3, 2013 Share Posted February 3, 2013 How tight is your tray when you pull it out (so to speak lol).Mine seems to be a bit better now, i think i must have bent the rails back into shape by mistake. Link to comment Share on other sites More sharing options...
philgor Posted February 12, 2013 Share Posted February 12, 2013 it's quite tight, most of the time i end up pulling the tray out, i only use it for storing bulb's etc, what does every one else use their's for? Link to comment Share on other sites More sharing options...
WilkesyMB6 Posted February 13, 2013 Share Posted February 13, 2013 I need some of that rubber anti-slip mat to go in mine as everything just rattles around in there. Link to comment Share on other sites More sharing options...
crazyrob9999 Posted April 12, 2013 Share Posted April 12, 2013 I got one in mine used to have fun stuff in it haha Link to comment Share on other sites More sharing options...
simpo Posted April 12, 2013 Share Posted April 12, 2013 I got one in mine used to have fun stuff in it hahaLike Wat balloons and magic tricks? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.