Dave Posted August 19, 2009 Share Posted August 19, 2009 mine doesnt have a plug that i can unplug it from?? It's like a sealed unit, with what looks like a big plug sticking out of it (this is the bit thats fouling any boss kits ive tried). To remove the srs spool, id have to cut the wires Link to comment Share on other sites More sharing options...
civicturbo79 Posted August 19, 2009 Share Posted August 19, 2009 I brought 3 boss's for my car and non of them fitted . i had the same problems as you guys . due to having to leave the spool on for the indicators cancel and horn wire. so i unscrewed the bottom of the boss off (ali part ) that has the splines on it for the coluum . Then got the standard steering wheel and plasma cut the part out of it with the splines on and the holes for the indicators cancel (as a circle the same size as the ali part you have removed from the boss) and welded it to the bottom of the boss in place of the ali part . works spot on . ( if you can not buy it make it ). Rich. Link to comment Share on other sites More sharing options...
dukeman35 Posted August 19, 2009 Author Share Posted August 19, 2009 there`s a red wire going into the centre of the wheel then a yellow/green wire for the srs unit,at the rear of the srs unit there`s a wire that leads down the column to another plug where you remove the whole unit,i`ve got mine in my hand now so can email pics if you want? Link to comment Share on other sites More sharing options...
dukeman35 Posted August 19, 2009 Author Share Posted August 19, 2009 I brought 3 boss's for my car and non of them fitted . i had the same problems as you guys . due to having to leave the spool on for the indicators cancel and horn wire. so i unscrewed the bottom of the boss off (ali part ) that has the splines on it for the coluum . Then got the standard steering wheel and plasma cut the part out of it with the splines on and the holes for the indicators cancel (as a circle the same size as the ali part you have removed from the boss) and welded it to the bottom of the boss in place of the ali part . works spot on . ( if you can not buy it make it ). Rich.mine still cancels and i took the lot off!!! just got no horn till i sort a plug...lol Link to comment Share on other sites More sharing options...
Dave Posted August 19, 2009 Share Posted August 19, 2009 so is the wire still there for the horn then, just isnt connected? I thought the wire went into the srs spool? Link to comment Share on other sites More sharing options...
Dave Posted August 19, 2009 Share Posted August 19, 2009 I brought 3 boss's for my car and non of them fitted . i had the same problems as you guys . due to having to leave the spool on for the indicators cancel and horn wire. so i unscrewed the bottom of the boss off (ali part ) that has the splines on it for the coluum . Then got the standard steering wheel and plasma cut the part out of it with the splines on and the holes for the indicators cancel (as a circle the same size as the ali part you have removed from the boss) and welded it to the bottom of the boss in place of the ali part . works spot on . ( if you can not buy it make it ). Rich.Superb! ou should start producing them man! lol I take it the itr doesnt have the same spool thing as mb's then Link to comment Share on other sites More sharing options...
civicturbo79 Posted August 20, 2009 Share Posted August 20, 2009 I brought 3 boss's for my car and non of them fitted . i had the same problems as you guys . due to having to leave the spool on for the indicators cancel and horn wire. so i unscrewed the bottom of the boss off (ali part ) that has the splines on it for the coluum . Then got the standard steering wheel and plasma cut the part out of it with the splines on and the holes for the indicators cancel (as a circle the same size as the ali part you have removed from the boss) and welded it to the bottom of the boss in place of the ali part . works spot on . ( if you can not buy it make it ). Rich.Superb! ou should start producing them man! lol I take it the itr doesnt have the same spool thing as mb's thendont know on that one dave ,it was just every time i ordered one they would never fit . so i just made one . i did the same thing for my bro's vti-s too. Link to comment Share on other sites More sharing options...
G Unit Posted August 20, 2009 Share Posted August 20, 2009 when fitting the itr or ek9 ect wheel can you juust plug the airbag for these wheels in and it will work like the original? Link to comment Share on other sites More sharing options...
1.8vti Posted August 20, 2009 Share Posted August 20, 2009 i think all honda used same , so think should be work fine. better ask blames cause he got EK9 one on his car Link to comment Share on other sites More sharing options...
gary87 Posted September 16, 2009 Share Posted September 16, 2009 I got a boss the other night to fit a Sparco wheel to my MB6 but its for a non airbag model. Does this mean that I won't have an indicator cancel and my airbags won't work? The airbags thing isn't a big issue to be fair but I'd like my indicator cancel to work :sThanksGary Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.