Jump to content

Another fault code.....can't understand list


burbleboy
 Share

Recommended Posts

Hi,

I have the usual common ABS light on (again) and this time it is a different code to last time i had bother.

There is one long blink followed by five other = 15.

I have a p28 ecu fitted and not sure if this would affect any readings.

Can someone with more brains than me tell me what the problem is from this list?

viewtopic.php?f=90&t=4268&p=37703&hilit=list+of+fault+codes#p37703

Link not 'live' for some reason!!

Any help appreciated

Ali

Link to comment
Share on other sites

link isnt live because your missing this part http://www.civic5.com/forum/

also looks like ignition output signal

just pulled this off of honda-tech.

if it were me i would test them backwards 3 then 2 then 1 as 1 is probs the most expensive part to replace.

Here's where to concentrate:

1) The igniter may be bad.

2) The Yel/Grn wire between the igniter and ECU may be bad (open or short).

3) The Blk/Yel wire between distributor 2P connector and ignition switch may be bad. There should be battery voltage with the key turned to ON(II).

Link to comment
Share on other sites

link isnt live because your missing this part http://www.civic5.com/forum/

also looks like ignition output signal

just pulled this off of honda-tech.

if it were me i would test them backwards 3 then 2 then 1 as 1 is probs the most expensive part to replace.

Here's where to concentrate:

1) The igniter may be bad.

2) The Yel/Grn wire between the igniter and ECU may be bad (open or short).

3) The Blk/Yel wire between distributor 2P connector and ignition switch may be bad. There should be battery voltage with the key turned to ON(II).

It wont be the igniton as i have no abs...it locks up when tested. So its abs related!

Thats what i mean about th code list..its confusing!

Link to comment
Share on other sites

The long five pin blue plug mate

That's ok then lol. Prob need a new sensor had them codes a while back new sensor sorted it

Link to comment
Share on other sites

I checked sensor this morning to see if anything was loose or broken, all seemed fine.

I will get a new sensor from ebay again.

Thanks for working out the code, appreciate the help!

Ali

Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...