LSA9K Posted September 5, 2013 Share Posted September 5, 2013 Anyone had experience with that lighting up - Any usual reasons or do I just need to connect the pins and find the code? Any try this advise welcome Quote Link to comment Share on other sites More sharing options...
dinochips Posted September 6, 2013 Share Posted September 6, 2013 my ABS turned on and off randomly, after getting the ecu read found it was a ABS sensor, quick easy fix next time it comes on see if you can get a garage to read the fault code for you. Quote Link to comment Share on other sites More sharing options...
LSA9K Posted September 6, 2013 Author Share Posted September 6, 2013 Thanks for that matey - Started driving this morning was on got half way over the back road to work and it went off been of since Quote Link to comment Share on other sites More sharing options...
simpo Posted September 7, 2013 Share Posted September 7, 2013 Just bridge the pins and find the code. Mine started off like that! As above most prob a sensor Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted September 7, 2013 Share Posted September 7, 2013 Sometimes a bit of clean of the sensors and rings is all that's needed. Quote Link to comment Share on other sites More sharing options...
jamezzz Posted April 24, 2014 Share Posted April 24, 2014 Sometimes a bit of clean of the sensors and rings is all that's needed.My ABS light has been going on and off for a few days now. Comes up as code 13 after a bridge test, which would be my passenger side front sensor. With it being intermitent, would that indicate more a dirt problem or just a sensor on it's way out? I had new outer CV joints fitted last August so I would have thought the teeth would still be clean? How do you clean the sensors? Do you have to remove the sensors to clean them? If a clean doesn't work and I have to source a second hand one, are the fronts sided or can you fit them to either side? Many thanks! Quote Link to comment Share on other sites More sharing options...
Calster17 Posted June 10, 2014 Share Posted June 10, 2014 I've had it on since last week. It's off until a few seconds after I start moving, then lights up. Often the next day that it's off and the the same happens. Putting it down to a sensor not working anymore giving the age & mileage. But got till October to resolve it... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.