lack of rear dash radio room

[ramy]

Has anyone had issues with limited space for wiring looms when instaling a new stereo,,,, had to take my alpine screen stereo out to replace car clock bulb n cant fit it back in , there's no space for all the amp leads n changed leads ,,, is there an easy trick to getting it to fit please

[Roylewaa]

If you take the glovebox lid off you can help pull the loom through the 2 holes at the back of the recess to enable enough space for the headunit to go right back

Hope this helps:)

[ramy]

Tried that but im pretty big n cant get my arm/hand up behind to feed loom through :/

[NIKH25]

It's very tight in there, the best thing is to cut the plastic out from the back, that makes a bit more room.

[ramy]

Cheers for help will give it a whirl tomoz

[KiNK43]

Can sometimes shove it downwards at the back either side of plastic if ya cables long enough

[Dave]

Yeah mate, the room behind the head unit is really tight. If there's extra cables for amps and stuff, then the best thing to do is try and remove as much of the plastic panel right where the rear of the head unit sits, and then feed the cables down the left hand side (there's a small gap there) and into the area at the side of the glovebox. I'm sure there's a how to somewhere in the electrical bit for it if you get stuck