Dakota Bronze MB6

[Krzys]

It sits flush but sticks out? Which is it? 

[Mikeyvti]

@Krzys i said it sat flush with his rear splitter but for some reason it sits about 10 - 15mm behind mine, havent got a pic yet @Grant but will try and get one later

[Grant]

What is the rest of your system? Standard, aftermarket? That is more than likely the difference.

[Mikeyvti]

Rest of the system is standard @Grant didnt even think that might be the problem

[Krzys]

  On 5/22/2014 at 1:14 PM, Mikeyvti said:

@Krzys i said it sat flush with his rear splitter but for some reason it sits about 10 - 15mm behind mine, havent got a pic yet @Grant but will try and get one later

That makes more sense than what I read

 

If the guy had his system made in one go that'll probably explain why it sticks out, you can either put up with it until you get a centre pipe made and have it done so the back box sits further in or get the piping shortened on the back box.

[Mikeyvti]

just spotted him on this thread actually its @phill1975 he did say was on his vtis when he bought the car so might have to try and find somewhere that will make me a custom B pipe and get it adjusted

[Grant]

Phil certainly wouldnt have sold you anything duff mate..

 

Will almost certianly be the case that the rest of his system was custom too.. which is why it'll be sitting differently on yours.

[NIKH25]

  On 5/22/2014 at 2:02 PM, Mikeyvti said:

just spotted him on this thread actually its @phill1975 he did say was on his vtis when he bought the car so might have to try and find somewhere that will make me a custom B pipe and get it adjusted

 

Alternatively you could have that extended, if it's only 10-15mm it shouldn't be that much work.

[Mikeyvti]

  On 5/22/2014 at 4:07 PM, Grant said:

Phil certainly wouldnt have sold you anything duff mate..

 

Will almost certianly be the case that the rest of his system was custom too.. which is why it'll be sitting differently on yours.

@Grant yeah i know phill wouldnt sell duff stuff he a good chap and gave it to me at a good price, will just see about getting either the b pipe or backbox pipe extended so it sits on all the hangers and sits flush

[Krzys]

Are you planning on getting a centre pipe made in the future? If so I'd leave the back box as is and get that made to fit so the tail pipe sits how you want it to.