Leaderboard

sweet man, i know you probably would've checked but thought id ask does look good mate

Looks clinical in that engine bay chief

More small jobs over the weekend - Function 7 LCA Brace - ARB There are a pair of additional support brackets that need to be fitted, unfortunately once again these were not designed for the Aerodeck!, time to modify.... These go inside the subframe for the brace and ARB brackets to attach to. The ARB brackets also had to be modified as the holes don't quite line up so just had to drill them out slightly Forgot to take pictures underneath so I'll do that this weekend. Car is on all 4 wheels and mobile again though! Sunday was wiring, so fitted all the chassis loom to the front of the car down the inside of each wing. Had to support the trunking in the wing so went for some riveted wire guides Protected the cable as it came through the chassis so it doesn't rub Other side, slightly different run as I had a little less cable to work with So just the headlight and fan plugs to wire up and the engine bay is done. Started the loom from the milspec to the ECU but ran out of wire Also fitted the next part of the oil system ahead of the engine install Fitted the oil temp and pressure sensors to the remote oil filter mounting

Ah cool, I reckon it'll idle better than with a stock flywheel at least