That's awesome, can't wait to have kids of my own but not just yet.
Few small updates in the last few days, like securing the dashboard a little better and started properly assembling the suspension.
Dash out and plan to mount a center point to bolt it down
Mount can be moved up and down to meet the daahboard
View from the underside with the dashboard back in. Can also see the inlet to the windscreen ducting
Dash in and a lot more secure
Used some of the remaining S2 cam cover washers to bling up the dash bolts
Next job was the back bumper and F7 LCA brace. The LCA brace took a lot of machining to make fit originally and I knew I still had a bit more work to do to make it fit the Aerodeck
Mounted and secure, just needs a new cap head for the upper left roll bar mount as I've lost one . I will connect up the drop links later
Back bumper cut out, marked out some options where I wanted to cut the bumper. Decided on the upper mark
Hole saw the corners
Angle grinder to cut the lines out
Drum sander to finish the edges and test fit
Cam cover off to fill the engine with oil and make sure everything is okay
Also filled the gearbox with MF3. Fill plug is easy to get to with no intake in the way!
So all the oils are now done for running in. Need to check and fill the oil cooler and Accusump but can do that later