Jump to content

shebabby

Member
  • Posts

    715
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by shebabby

  1. looking mint mate white wheels will look more aggresive i think ?
  2. i thought the same with mine also it took a few days on the top ov the boiler to cure enough for me to handle it by hand . hope it goes well for you mate
  3. if you havnt used wrinkle paint before ? i will say its fun but a pain in the bum at the same time you will need heat for it to wrinkle
  4. could be ! guess im gunna have to try changing parts
  5. wot did it run like before mate ? could you post a vid ?
  6. try cleaning the pads and disks first mate ? or even swop pads from left to right and see if that makes a change
  7. could be a faulty fuel pump or blocked fuel filter ?
  8. yes mate i bridged the yellow two pin plug to the left of the fuse box under the drivers compartment i have done it about 10 times today the light goes out but soon as i start to drive it comes back on ?
  9. hi peeps i was driving home last night and the srs light came on i read the code and it came up with code 11 which is drivers air bag open cercuit ? iv tried chainging the drivers air bag and reset the code and the light still comes back on has anyone got an idea ov what it might be ? thanks !
  10. not realy a performance booster more of a de~tox
  11. think im gunna put one on my MC are you keeping your signature or ar you going to change it
  12. its up to you then mate if you take it off it will allow more heat to transfer through the floor in the car also ur handbrake cables are sheilded with it and there not cheap as i found out when one ov mine snaped but its up to you mate
  13. if you can secure it mate it would be a better choise
  14. x2 check the codes first
  15. x2 mine pulls well for what it is realy and dont have any complaints
  16. always had a short intake andrew and no problems the flat spot goes when the car is up to temp ie: when the thermostat is open ! i reccon its the fueling ov the ecu thats the problem but doesnt realy bother me as it only does it once or twice untill its been past the vtec then doesnt do it again untill its cooled back down Is it worth drilling the thermostat. the thermostat has already got a hole in it i think its cus ov the size ov the rad i dont drive it untill the temp is up anyways so not a problem realy . thanks for the heads up tho
  17. always had a short intake andrew and no problems the flat spot goes when the car is up to temp ie: when the thermostat is open ! i reccon its the fueling ov the ecu thats the problem but doesnt realy bother me as it only does it once or twice untill its been past the vtec then doesnt do it again untill its cooled back down
  18. cheeres mate did owt take ur fancy
  19. thanks paul the manni looks cool with all the different colours but you cant realy tell in the pics its not bad realy to say i didnt plan to go that far my intentions was to fit a few parts and just a general clean but i got carried away
×
×
  • Create New...