Paulvti

Nice simple job on a SOHC Good on you mate, saved yourself money doing it!

33,000 miles!?!!??!!?!??????!??????!!!

Hmmmm but of a tricky one.... I've had a new driveshaft before that was improperly balanced and made a horrible knocking/vibration so before you go gearbox try just changing the shaft as it could save a lot of time and money, Check your ball joints and track rod end, you must always start off simple and cheap before digging deep and burning the wallet! It does sound gearbox related but I can't get my head around the 50mph fine as soon as you go over once it happens all the time.... Now that makes NO sense whatsoever

Do t worry mine builds up to 3/4 when sat still in hot weather it will drop a little once the fan kicks in but not by much, whilst driving about it sits around the 1/4 mark, The thermostat will be on the top hose the same as every other car, You could try changing the thermostat or bleed the cooling system see if they helps....

I don't understand why they would be so intermittent..... My 1990 Crx fuel light worked so why not on a car from the 2000's!?!

Your a lucky guy then

I have had a fuel light on both my MC2's they work/worked every now and then at different fuel levels lol They are pretty useless really.....

Oooooooo that looks interested, I might be interested in one of these also

Aftermarket as in external coil? There's a pla e in Essex called ignition car parts that do these ones for around £300

Make sure you take it down a 1/4 mile to see what time you run! I'm currently sourcing bits for my blower

That's very good power from a Z6 mate nice one

That's a lovely car mate, personally liked it white but looks gorgeous in both colours

Oh and he's the guy that will be tuning my engine as he is very good at mapping Hondas and seeing good safe powers

What power is your Z6 running then dude with all that work? I'm just getting a socketed P28 for now the main thing that confused me is the ecu harness but I spoke to daz at endless horizon and he said you just need to trim a little tab off one if the plugs for it to fit straight on so no problem

That's a very pricey clutch for an OEM one when you can pick a blueprint one up that will be just as good as the Honda one for £126 from a motor factors I use blueprint all the time and they manufacture their stuff at a VERY high quality

Your video does this no justice, Where's the noise coming from? You can hear the whining sound your on about but that would usually be the sound of a pulley, pump, tensioner or belt on its way out There's not too much to go by with your video or information....

Haaaaaa I like it

Fidanza is like the umbro of the the trainer world... You get what you pay for though....

For a GOOD remap I'd advise you to use daz at endless horizon in Northampton! Will get you good gains and better fuel consumption!!!

DC2 done deal

leads and plugs first if still no cure it'll be the crank position sensor or coil inside the distributor starting to fail, I would know I've had many fail in the past

Do the heaters still blow hot? Check for leaks if no leaks it's more than likely the head gasket is going.....

4-1 torque, 4-2-1 horsepower These are the main benefits from the different designs, both will do the best of both worlds but work more towards one than the other

That's common on most cars mate, if it does that either roll forward a little then engage reverse or depress clutch try if it doesn't go in straight away release then put the clutch down again