h4mza

Not keen on fan blades so got these Speedlines which I resprayed white before fitting.

Would love to see what's under the bonnet, don't think just exhaust system and induction kit gives 197hp, there must be more done to it.

@hondasport Yes the back lip fits the same way as front lip with screws on side and holes drilled on bumper.

The front lip has two screws on side and a few bolts on the bottom which mount onto the bumper. I didn't bother with sealant. The skirts have plastic rivet screws on bottom which you remove carefully to not mess up the shape and 2-3 screws on front then it slides forward to come off. Easy way to refit is put all clips on the skirts and push it in then slide backwards. The back lip is bit of a job as it needs holes drilling onto the bumper, and 3M double sided tape inner top edges so it fits neatly with no gap and then screws on both sides and bottom to mount it onto the bumper.

I like what you've done to the fogs as mine are cracked too, I'll be doing the same

@Chandler Yeah mate I used a normal bulb holder wired to side repeater but now want to swap it with USDM kit I got off you long ago, was just wondering would only headlight indicator be on with side lights or the side repeater too?

I gave up in the end and just powered it up with side repeater so it's working as it should.

How long did it take to fit the hawk alarm as it any good? I need one for mine and considering hawk.

@Chandler I placed the multimeter on the spade connectors which go in the brown plug, the wires were covered in some white paste which I cleaned off first. No wire tuck done at all, I did however cut through the all the cable tubes to make it easy to follow the wire inside. I also used a separate earth wire connected to the battery and still nothing. I found these two wires pop out of nowhere under the dash, not sure if it's related to my problem but I don't know what they are for and where they plug in.

1.5 is an MB3, 115hp stock. I had one and they are good overall cars. That advert is quite hilarious tbh lol

I've stuck to old way of uploading to Photobucket and copy IMG link. Always works.

My driver side headlight indicator isn't working at all, the side repeater and tail light indicator do work. I've replaced the bulb a few times and it hasn't helped. I removed the bulb holder to check the wires and there are two wires, one is black which I believe is earth and the other yellow/green which I believe is power. I used a multimeter to check for power and there isn't any. I've also traced the wire all the way back to under dash fuse box and it is connected to a plug which is plugged at back of the fuse box. So seems like the wire is intact. I also can't find a fuse for the indicators so I'm literally out of ideas on how to fix this. Any help please, thanks.

Just a random side shot, don't think I ever took one.

Ok I'll leave it there then as already got CD player. @KiNK43 Just read your comment properly and looked up the prices on those parts you mentioned and they seem within my budget. I'll be collecting a few bits soon, was just wondering if you got link to your MB6 build please?

Had an issue with boot being stuck and not opening so bit of fiddling about for an hour and spraying WD40 on the hinges, it popped open. It was creaking as I moved it up and down so sprayed tons of WD40 all over the hinges and on lift support until no more noise. Let's just hope it doesn't get stuck again. So I then proceeded to remove the rear wiper and de-chrome the number plate trim. Think it looks neat like this. Got all the junk out to check for any water leaks but thankfully none. Just curious if anyone knows what this wire does as it wasn't connected to anything.

A few changes under the bonnet, nothing new, just swapped a few bits off my old civic.

It was quite bad here up in North, luckily both my Ms are fine.

@KiNK43 Thanks. Yeah I’ve been doing some research into these engines and think it’s too much effort and money for 200hp. I don’t want to be spending too much for little gains so I will stick to 190-195hp which I’ll still be happy with. Need to spare some cash towards Meisters lol. Just sorted insurance out and now driving her as a daily, so modding will start anytime soon.

@UnicyclingTom Thanks I did a quick job with £1 rattle can. Will soon colour code it.

Damn did somebody feed the pigeons some laxatives?

Resprayed grill, added missing headlight washer jet and dechromed the headlights. Excuse for dirty car.

@dr_broon Thanks I'll look into it. Might just contact Koni and see if they can help.

@dr_broon Are you still using the same suspension and how does it ride? Is there anyway I could obtain those spacers from elsewhere?

Love these headlights, does the red not p**s off popo?

@UnicyclingTom These are the threads but I doubt the OP are active since it's 5 year old thread lol. http://civic5.com/forum/topic/1610-spacers-for-koni-strt-shox-springs/ http://civic5.com/forum/topic/2136-koni-strt-problems/