h4mza
-
Posts
403 -
Joined
-
Last visited
Content Type
Store
Calendar
Forums
Gallery
Downloads
Posts posted by h4mza
-
-
Have you checked the power steering fluid level? If it's low then it could cause steering noises.
-
Does it make hard to steer?
-
What size are the wheels?
-
I normally pour hot boiled water over the rusted and tight bolts to losen them. Works most of the time
-
Looks awesome, now you just need a rear lip
-
I went through the whole thread and gotta say your car is really clean, looks awesome slammed on those wheels, what make are they?
-
Next mod is mgzs 120 suspensions and after that the BIIIIGGG mod
which is a secret 
I'm guessing K20 engine
-
Lol I meant the front end but yeah cars are never complete, list of plans are infinite.Complete? Never!
COTM, yeh definately should be.
-
1
-
-
Glad your hard work is appreciated. Hopefully one day it will be voted car of the month
Now you just need to add fog lights and then it's complete.
-
1
-
-
I think it will look better with silver bonnet and debadged grill.
-
1
-
-
Yes the leaks is coming from the engine area. Sometimes I can see yellow/greenish liquid over the front lip. It had rained in the past few days so couldn't really determine the leaks but I've noticed one particular area on the ground that is always wet, it is coming from under the corner of the front driver side. Any idea what that could be?
Also got a few updates. As my exhaust centre pipe was broken, I tried to replace it with an 2.5 I had bought earlier on but it was short from the front. So what I did was add the decat pipe on front of it, not sure if stupid idea lol? The decat pipe wouldn't fit on my car anyway. It sounds nice and loud but I want it more louder so next thing on my list is an aftermarket manifold but first I need to get the lowering springs installed as they are sat here doing nothing
I also re wrapped the dash trim again in carbon, previously I had to use 3 seperate cuts and it looked horrible so now one full sheet, nice and smooth.
Lastly my red rocker cover, my first engine mod
Also did few other bits. Quite pleased with but I'm wanting to do the Honda text in black as well as all the bolts on the rocker cover.
-
yep and was a s**t of a job to do
Mind telling me what needed to be done?
-
Hey guys back on here, want to ask a similar question but didn't want to make a new thread.
So yeah I think I do have what it's called catifold, manifold and catalytic converter in once piece.
I would like to make my exhaust louder, so I was thinking of getting a 4-2-1 manifold with downpipe. This way there will be no catalytic converter so will this mean it is decatted? Also does the the downpipe connect straight to centre pipe?
I currently have standard setup except the backbox welded onto standard tailpipe. My centre pipe has broken so needs replacing. I already have a 2.5 centre pipe. I placed in underneath the car in same position as standard centre pipe and it's short from the front. So what now? Could I just bolt the straight decat pipe to make it longer or will that be a stupid thing to do lol
-
Did you fit the EP3 seats yourself?
-
Got bad news and confused what to do. May need some advice.
A few weeks ago I noticed some spill on the floor every morning I took the car out of driveway, stupidly I didn't pay attention to it. I also could smell petrol in my car at some times. Few days later it was getting frustrating to see the spills so I had a look underneath and couldn't tell anything. I checked the oil and dipstick mark was showing very low so I bought and poured in 2L of the same oil.
It's now been 2 weeks and the car has since spilled twice. Last time it spilled was 5 days ago. Around the time when the spills occurred, my exhaust also started to sound loud. It's only a back box I have with standard tail pipe.
Just recently, few days ago, I was driving uphill and exhaust became even more loud. Every time I went over speed bumps, I could hear knocking noise from the exhaust. Also my petrol light came up the same day when I had only done 54 miles. I was shocked to see it because I normally get 100-130 miles from £20 petrol. So I drove until 81 miles then filled up £20. It's been a few days and today petrol light came up at 80 miles which seems alright to me as it's normal, I could get 30 miles extra totalling 110 miles but it's always town driving I do.
Only had a chance to go to garage today to check and they couldn't find any leaks, but we saw that the centre pipe had broken causing the exhaust to knock and sound loud. I've already got a stainless centre pipe and also a decat so I think it's about time to get it fitted. What I'm worried about is why couldn't they find any leaks? Why would the car leak for a bit then all of sudden stop? If I leave it like this unchecked, would there be a bigger problem in future?
-
Why red primer?
-
I have seen your thread Tom, the projectors do look awesome. I like the BMW style angel eyes
Are they easy to make yourself? I've seen G3 projectors on eBay for £50 and thought all I need to do is spray all chrome bit headlight black and shove in the projectors where the H4 bulb goes. Is it that simple or more is required?
-
HID kit looking nice and white, quite pleased with them.
Random shot
Fitted more stickers
-
2
-
-
Wish I could but it's £250 for a set isn't it? I cannot afford them lol I might try making my own if it doesn't cost alot.
-
Double din is a must for me, just don't want to mess anything up lol
-
Mine had deep finger marks so wrapped them and really pleased with out come. Next I will re wrap the dash trim properly as last time I had to use 3 seperate cuts.
Also bought a MB6 bumper which came with VTi lip and fogs for a bargain price. Haven't checked the fogs and may sell it as I have no need for it. The lip is also not needed so that will go as well along with some other lips as well. I bought the bumper main for headlight washers as I think they add a mean look to front end. Will get it resprayed first then fit.
Also bought and fitted 6000K HID kit, will take pictures at dark then upload here
-
Did bit of carbon wrapping
Also bought a decat which came off an EG B16A2. I wasn't sure if would fit but I heard B and D series are interchangeable so I should be fine I guess. Does need a clean, previous owner had it lying around for ages lol.
-
1
-
-
@h4mza I will be selling my front and rear bumpers soon bro..The ones I already got
I have bought a front bumper now, just waiting for it to arrive. Rear bumper is not needed
-
1
-
-
Forgot to say thanks to @burbleboy for helping me on advice about steering wheel horn, saw his build thread and inspired me to get the same steering wheel, top bloke he is
-
1
-
Hamza's MB3
in Honda Civic MA/MB/MC
Posted
So here's my new thread for the civic. It's my first car and I've had it nearly a year now. Pictures when I got it.
Headlights weren't bright so got new Osram Night Breaker bulbs.
Wanted to put 15" wheels like everyone else so got these Jordans which I then resprayed in black.
Fitted sunstrip, VTi lip and carbon wrapped the grill.
VTi-S kit which I bought off a member on another forum.
Took the car to bodyshop to get VTi-S kit resprayed as well as bumper trims for a fresh look.
Exhaust started to blow so was about time I get new system.
Race tube b pipe
Decat
Video of sound
Bought a few goodies for my birthday.
Plasma dials
EP3 seats
6000K HID
Pro Sport 40mm lowering springs
Steering wheel, plasma dials and HID kit fitted same day.
Dechromed my headlights and resprayed rocker cover.
Got a replacement bumper off eBay
Colour coded the bumper at local garage and also got them to fit the springs.
