KiNK43 Posted August 17, 2015 Share Posted August 17, 2015 Nice man. Very good upgrade. Quote Link to comment Share on other sites More sharing options...
DanialA11 Posted August 18, 2015 Author Share Posted August 18, 2015 Would this explain the dyno results, I was told this was the 1st mod carried out before any induction kit or anything Is there anyway of checking to be sure Quote Link to comment Share on other sites More sharing options...
Krzys Posted August 19, 2015 Share Posted August 19, 2015 Cams are a very good mod indeed, is there any paper work about it? I think the only real way to check would be to get the rocker cover off and look at them, though I'm not sure how you can tell what they are by looking at them? If it's had the other parts changed that they say it has and was remapped you'd expect the rev limiter to have been raised too I'd have thought? Quote Link to comment Share on other sites More sharing options...
DanialA11 Posted August 19, 2015 Author Share Posted August 19, 2015 Not been mapped guy I bought it was was mento get it mapper before he decided to sell.There's no paper work all visual 2nd hand ebay purchases I would assume,, the couple brand new items thag are on the car are documented e.g manifold springs engine dress up shocks and so onI'll have to have a search and find out how to recognise the cams but I did have a little play (3 runs) with my mates mb6 vtis last night and was pulling away from him nice as soon as the tec kicked in ...His car has more or less same mods (induction kit, lowered, 4-1 manifold with a custom exhaust)Mine has a 4-2-1 and separate bolted on exhaust bits and is blowing from down pipe slightly. Quote Link to comment Share on other sites More sharing options...
Krzys Posted August 20, 2015 Share Posted August 20, 2015 Hopefully it has got uprated cams in it! That'll be a nice bonus, especially so if you get it mapped! Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted August 20, 2015 Share Posted August 20, 2015 You can check cams take rocker off and the end cam retainer and you can check what cams are fitted. Yes it would give more power if mapped. But that dyno printout has been made to give a good reading. As I said further up your wheel horse power is 136.5hp. 15% loss through transmission. Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted August 20, 2015 Share Posted August 20, 2015 Check this website for how to identify cams.http://www.ff-squad.com/tech/temp/VtecCams.htmWish I'd known previously I bought b16a cams for top wack only to get car mapped made 174bhp.I know better now. And got some real ones. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.