Blackwolf Posted August 13, 2017 Share Posted August 13, 2017 Hi everyone i was wondering what is a good turbo or turbo kit to use engine wise id be looking at either the 2.0 out of the gen 1 cr-v or a b16 or 18. Bit of a odd one i know lol cheers ben Quote Link to comment Share on other sites More sharing options...
3gdean Posted August 13, 2017 Share Posted August 13, 2017 b16/ b18 best bet, the b20 has the thinnest sleeves, depends what you want it for, hondatech is a great site for learning about boost and honda, tones of info there. turbo, t3 frame as our engines like to breath, i'm using garret 3071r., minimal lag and no creep, 330hp at10psi Quote Link to comment Share on other sites More sharing options...
Blackwolf Posted August 13, 2017 Author Share Posted August 13, 2017 At first i wont be looking at high BHP its mainly a cost orientated choice. like what is a safe amount of boost to put through a b20? also could you put a link to the turbo part of the honda tech site as i couldn't find it myself Thanks Ben Quote Link to comment Share on other sites More sharing options...
3gdean Posted August 13, 2017 Share Posted August 13, 2017 (edited) hp goal, for what use? fast road/track/drag/daily driver psi is pretty irrelivant, depends on size of turbo. https://honda-tech.com/forums/forced-induction-16/ I started out as a cheap boost build. Many have said it, honda + boost is not cheap. base parts my cost clutch - 350 new turbo - 300 second hand manifold - 150 new cast hondata - 500 new wideband + oil pressure/temp - 220 new ic/piping - 100 new exhaust - 350 new + cheap wastegate - 50 lines water and oil - 50 injectors - 100 second hand Then brakes, tyres, tuning loads of little bits, servicing. Edited August 13, 2017 by 3gdean forgot something Quote Link to comment Share on other sites More sharing options...
Blackwolf Posted August 13, 2017 Author Share Posted August 13, 2017 It will be for fast road use mainly and around the 200-250 mark nothing crazy and i had an idea it would cost around that sorta price for things so im not shocked lol. tyres are sorted brakes will get done at the same time and it will get a service Quote Link to comment Share on other sites More sharing options...
3gdean Posted August 13, 2017 Share Posted August 13, 2017 easily done on a d-series, will make it a chunk cheaper Quote Link to comment Share on other sites More sharing options...
Finch Posted August 16, 2017 Share Posted August 16, 2017 Have a T3 / .63AR turbo here if you want it, £50. Was on a D16Z6 making 334hp / 267ft-lb @ 8300 to wheels on 22psi - YCP Vitara pistons / Tunertoys rods, ACL bearings, ARP head studs, 1200cc injectors, 330lph pump, Y8 intake manifold bored and honed, head work (Supertech valvetrain etc) and D15B JDM cam, PTFE gaskets on intake, ported head and a ported, polished, shimmed and clearanced oil pump. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.