kyekye09 Posted April 15, 2013 Author Share Posted April 15, 2013 i will look into it bud i think a trip back to the mot station just to pick his brain Link to comment Share on other sites More sharing options...
philgor Posted April 15, 2013 Share Posted April 15, 2013 i will look into it bud i think a trip back to the mot station just to pick his brainor me...i blue peter fashion here's a post i did earlier....http://www.civic5.com/forum/viewtopic.php?f=127&t=9659&p=123027&hilit=+abs#p123027bottom post, i'm not too sure on the new reg's as i haven't done a test since january. but as your's is a 1.6 abs was standerd fitment, but with the modified vehicle's clause, it may be ok with out abs.... Link to comment Share on other sites More sharing options...
kyekye09 Posted April 15, 2013 Author Share Posted April 15, 2013 i will look into it bud i think a trip back to the mot station just to pick his brainor me...i blue peter fashion here's a post i did earlier....http://www.civic5.com/forum/viewtopic.php?f=127&t=9659&p=123027&hilit=+abs#p123027bottom post, i'm not too sure on the new reg's as i haven't done a test since january. but as your's is a 1.6 abs was standerd fitment, but with the modified vehicle's clause, it may be ok with out abs....so are you saying depending on tester and station it might pass but then again it might not... so confused Link to comment Share on other sites More sharing options...
kyekye09 Posted April 15, 2013 Author Share Posted April 15, 2013 btw while im on the mot thing there was nothing said about the projectors Link to comment Share on other sites More sharing options...
philgor Posted April 15, 2013 Share Posted April 15, 2013 i will look into it bud i think a trip back to the mot station just to pick his brainor me...i blue peter fashion here's a post i did earlier....http://www.civic5.com/forum/viewtopic.php?f=127&t=9659&p=123027&hilit=+abs#p123027bottom post, i'm not too sure on the new reg's as i haven't done a test since january. but as your's is a 1.6 abs was standerd fitment, but with the modified vehicle's clause, it may be ok with out abs....so are you saying depending on tester and station it might pass but then again it might not... so confused yep, it's all down to the tester reading the manual, even more so when it come's to exesessive play in a ball joint, we're not given a it's exesessive at 5mm of movement...that's a bonus about the projectors as well. Link to comment Share on other sites More sharing options...
gary1mc Posted April 15, 2013 Share Posted April 15, 2013 nice one on the projectors Link to comment Share on other sites More sharing options...
kyekye09 Posted April 15, 2013 Author Share Posted April 15, 2013 or me...i blue peter fashion here's a post i did earlier....http://www.civic5.com/forum/viewtopic.php?f=127&t=9659&p=123027&hilit=+abs#p123027bottom post, i'm not too sure on the new reg's as i haven't done a test since january. but as your's is a 1.6 abs was standerd fitment, but with the modified vehicle's clause, it may be ok with out abs....so are you saying depending on tester and station it might pass but then again it might not... so confused yep, it's all down to the tester reading the manual, even more so when it come's to exesessive play in a ball joint, we're not given a it's exesessive at 5mm of movement...that's a bonus about the projectors as well. so if i was to do the complete abs delete i might still be wasting my time i will get down to the mot tester in the morning and see what he says Link to comment Share on other sites More sharing options...
gary1mc Posted April 15, 2013 Share Posted April 15, 2013 no you wont be wasting your time with that the mot guide states that abs where fitted to a standard vehicle of this type must be tested accordingly note the word standard and as you would be removing the complete abs system your car is no longer classed as standard and must be tested as a modified vehicle .you dont even have to declare that you have removed the system that way the tester will look at the cv's and dash and see no trace of an abs setup and assume the car is non abs so if i was to do the complete abs delete i might still be wasting my time i will get down to the mot tester in the morning and see what he says Link to comment Share on other sites More sharing options...
noodels Posted April 15, 2013 Share Posted April 15, 2013 think brake proportion valve has to be fitted from an early model Link to comment Share on other sites More sharing options...
kyekye09 Posted April 16, 2013 Author Share Posted April 16, 2013 think brake proportion valve has to be fitted from an early model ...???? whats that for andrew...???? going to get another look at the new deck today so as said i might just strip the white one and start again ...... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.