Dave Posted February 11, 2011 Share Posted February 11, 2011 Ok, first thing to check is the following..1. Is everything else working? Like clock, radio, cigar lighter etc? There's a main accessory fuse in the engine bay fuse box, although not sure if it would affect the windows.2. With drivers door panel removed, check all wiring for the switch/motor. Use a volt meter if you can to see if the power is actually getting past the switch.3.Next step will be a bugger. You need to locate the relay for the windows. It should give an indication in the manual where it is.4. Make sure the fuse you're checking in the fusebox is actually the fuse for the windows. If you're not sure exactly which one it is, I'll see if I can take a photo of the fusebox, with the fuse you need highlighted in the pic.Hope this helps Link to comment Share on other sites More sharing options...
King Posted February 11, 2011 Author Share Posted February 11, 2011 Ok, first thing to check is the following..1. Is everything else working? Like clock, radio, cigar lighter etc? There's a main accessory fuse in the engine bay fuse box, although not sure if it would affect the windows.2. With drivers door panel removed, check all wiring for the switch/motor. Use a volt meter if you can to see if the power is actually getting past the switch.3.Next step will be a booger. You need to locate the relay for the windows. It should give an indication in the manual where it is.4. Make sure the fuse you're checking in the fusebox is actually the fuse for the windows. If you're not sure exactly which one it is, I'll see if I can take a photo of the fusebox, with the fuse you need highlighted in the pic.Hope this helps thanks for the reply,1. yes everything else is working fine2. will do this 3/4. i got a second opinion from M.S.K autos who are big in hondas, he checked the fuses aswell, and the engine bay relay (lack of) and said they were ok. he did mention something around the lines of "you should be able to here the window relay switching when near the fuses but cant?" also all 4 windows have individual fuses so checked them too. Link to comment Share on other sites More sharing options...
beastgtir Posted February 11, 2011 Share Posted February 11, 2011 i've got a complete vti, if you need parts to try or to swap over.just in sparkhill, il pm u my number. Not any good with electrics though lol Link to comment Share on other sites More sharing options...
King Posted February 11, 2011 Author Share Posted February 11, 2011 i've got a complete vti, if you need parts to try or to swap over.just in sparkhill, il pm u my number. Not any good with electrics though lolOK thats cool, IMO its an electrical fault somewhere but once i find out what exactly is causing the problem then i will let you know! Link to comment Share on other sites More sharing options...
simpo Posted February 11, 2011 Share Posted February 11, 2011 i would say its your power control unit which is behind the drivers door card(i think) Link to comment Share on other sites More sharing options...
King Posted February 11, 2011 Author Share Posted February 11, 2011 i would say its your power control unit which is behind the drivers door card(i think)power control unit? hmmmmm i hope your right ill give that a look at first, if your right i'll then you deserve a blue peter badge Link to comment Share on other sites More sharing options...
simpo Posted February 12, 2011 Share Posted February 12, 2011 it you turn the key but dont start it push down on the drivers window and you should here it click. even though its click still doesnt mean its working as thats wat happen to me. you can take it apart and will prob find something wrong on the chip board i just put a new bit of solder on it job done Link to comment Share on other sites More sharing options...
King Posted February 12, 2011 Author Share Posted February 12, 2011 it you turn the key but dont start it push down on the drivers window and you should here it click. even though its click still doesnt mean its working as thats wat happen to me. you can take it apart and will prob find something wrong on the chip board i just put a new bit of solder on it job doneAnd that could cause all 4 windows to stop? Hope its true... Link to comment Share on other sites More sharing options...
King Posted February 12, 2011 Author Share Posted February 12, 2011 Just tried the above, turned key but did not start the engine, pressed the switch up and down and did not hear a click? Link to comment Share on other sites More sharing options...
simpo Posted February 12, 2011 Share Posted February 12, 2011 the whole unit could be down. if you lived closer i would let you try mine. take it apart and check the board inside Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.