Jump to content

Vtec doesn't always work?


vtec2011

Recommended Posts

As above really.

I have a question, I know on paper our VTEC is meant to engage at 2500 RPM in 1st, 2nd, 3rd and 4th and I belive 3000 RPM in 5th gear. However my ECONO light goes out (I'm guessing VTEC engages) whenever I floor it. No matter what RPM I'm at, does your's do the same? So even if I'm under the RPM band and floor it the light goes out.

Does your's do the same?

Cheers.

harVTEC

Link to comment
Share on other sites

air filter condition ?

feul filter condition ??

I replaced the air filter for a K&N panel filter, and changed the oil filter whilst doing a oil change. But i havent changed the fuel filter yet..

Thanks

Link to comment
Share on other sites

As above really.

I have a question, I know on paper our VTEC is meant to engage at 2500 RPM in 1st, 2nd, 3rd and 4th and I belive 3000 RPM in 5th gear. However my ECONO light goes out (I'm guessing VTEC engages) whenever I floor it. No matter what RPM I'm at, does your's do the same? So even if I'm under the RPM band and floor it the light goes out.

Does your's do the same?

Cheers.

harVTEC

Yes mine does the same. When you push the accelerator down more no matter what rpm its at, eco turns off meaning it goes from 12 valve to 16 valve

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...