Jump to content

2013 & Your Civic!!!


knight
 Share

Recommended Posts

this year i have a few plans no where near as much as last year :lol:

arm rest and cup holders

new gear knob

s/s mid pipe

rear tie bar

short shifter

fog lights

and probably need a casual service and belts/water pump needing done

looking forward to this year its going to be a good one!

Link to comment
Share on other sites

  • 3 weeks later...

Umm, this year will be busy, but still, I try my best.

Must do:

Paint to summer wheelset and new summer tires.

Cambelt

Rear big bushings

ARB Bushings front and back

Fix the dent from drivers door

small rust repairs to boot lid

A/C maintenance

Only visual:

Drivers seat leather is a bit worn out, I already have Furniture Clinic things to fix that.

Same thing with steering wheel, sunburnt parts needs a new coating.

Maybe, if cleaning doesn't help, then:

Piston rings and with that general cleaning and inspection to everything. Still burns oil and stem seals are already new.

And for next winter:

Heated mirrors

Heated seats (wires, relays, buttons)

I just need to find some donor car for those parts, at least the heated seat relay set is somewhat complicated. My MC2 is imported used from Germany and it misses those basic winter equipment. I think it's easiest to change mirror interiors from official Finnish import MB3 or some other model with electric mirrors, which has heated mirror glasses already, not to mess with any aftermarket heating pads. I had those thing in my MB3 and I'm really missing both.

Link to comment
Share on other sites

its a secret... just kidding

full s/s exhuast system, hi flow sports cat (must)

uprated clutch or oem clutch (must)

fancy lca's (wishlist)

powerflex bush kit upgrade (wishlist)

fresh set of wheels (wishlist)

and the wishlist goes on..

Link to comment
Share on other sites

  • 3 weeks later...

Engine/Drivetrain:

-Fidanza 3,4kg flywheel (already bougth)

-Exedy Stage 1 clutch (already bougth)

-Y21 transmission swap (with new synchros) but 4.2 lsd remains

-New clutch slave cylinder (already bougth)

-Surge tank

Brakes:

-New grooved discs

-Braided Goodridge brakelines

-EBC Redstuff pads

-Caliper paint

-Brake shield removal

-Brake master cylinder stopper

Suspension:

-MG Zs rear arb with new poly bushes (already bougth)

-Adjustable camber arms (already bougth)

-Hardrace bushes

-Rear upper strut bar (c-pillar)

-Stiffer front strut bar (oem removal)

Wheels:

on track:

ITR DC2 96 spec wheels (just repainted NH-0) with Toyo R1R 195/55/15 semislicks

on street:

Barzetta player bronze with Toyo T1R 205/45/15

I'm currently aiming to the Finnish Time Attack series, so few of those things are mandatory to upgrade. Those were the major subjects and maybe I forgot something.

Can't wait until tracks open! 8-)

Link to comment
Share on other sites

  • 1 month later...

My MB6...new mods for this and next year...

Dc2 gearbox

New coilovers

New wheels

new front seats recaros hopefully

mg zs rear anti rollbar

engine bay fully colour coded

rear towing eye

front towing strap

new plates

vti-s side skirts

new grooved discs and pads

can go on for another 30mins but hopefully an engine swap for K20 :)

Link to comment
Share on other sites

Engine/Drivetrain:

-Fidanza 3,4kg flywheel (already bougth)

-Exedy Stage 1 clutch (already bougth)

-Y21 transmission swap (with new synchros) but 4.2 lsd remains

-New clutch slave cylinder (already bougth)

-Surge tank

Brakes:

-New grooved discs

-Braided Goodridge brakelines

-EBC Redstuff pads

-Caliper paint

-Brake shield removal

-Brake master cylinder stopper

Suspension:

-MG Zs rear arb with new poly bushes (already bougth)

-Adjustable camber arms (already bougth)

-Hardrace bushes

-Rear upper strut bar (c-pillar)

-Stiffer front strut bar (oem removal)

Wheels:

on track:

ITR DC2 96 spec wheels (just repainted NH-0) with Toyo R1R 195/55/15 semislicks

on street:

Barzetta player bronze with Toyo T1R 205/45/15

I'm currently aiming to the Finnish Time Attack series, so few of those things are mandatory to upgrade. Those were the major subjects and maybe I forgot something.

Can't wait until tracks open! 8-)

Engine/Drivetrain:

-Fidanza 3,4kg flywheel (already bougth) -DONE-

-Exedy Stage 1 clutch (already bougth) -DONE-

-Y21 transmission swap (with new synchros) but 4.2 lsd remains -DONE-

-New clutch slave cylinder (already bougth) -DONE-

-Surge tank -CANCELED-

Brakes:

-New grooved discs -DONE-

-Braided Goodridge brakelines -DONE-

-EBC Redstuff pads -I STILL HAVE PADS FROM LAST YEAR-

-Caliper paint DON'T KNOW..

-Brake shield removal DON'T KNOW..

-Brake master cylinder stopper -DONE-

Suspension:

-MG Zs rear arb with new poly bushes (already bougth) -DONE-

-Adjustable camber arms (already bougth) -DONE-

-Hardrace bushes -NEXT YEAR-

-Rear upper strut bar (c-pillar) -DON'T KNOW-

-Stiffer front strut bar (oem removal) -DON'T KNOW-

EDIT:

-Bought D2 Street suspension and installed

Wheels:

on track:

ITR DC2 96 spec wheels (just repainted NH-0) with Toyo R1R 195/55/15 semislicks -DONE-

on street:

Barzetta player bronze with Toyo T1R 205/45/15 -ALREADY-

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...