jasons Posted January 10, 2013 Share Posted January 10, 2013 Just want confirmation reallylooking at a brake stopper, but a little confused as to which one would fit. (its actually for an MG ZS)should I be looking at the ek or something else?I did a search and this was asked before, but the ebay link was for a lhd one, so not sure if the sellers been changing his stuff around - it was 2011 the post. Quote Link to comment Share on other sites More sharing options...
hickster Posted January 10, 2013 Share Posted January 10, 2013 ZS should be fine. I think EK will not fit because the upper wishbone is different (brake stopper usually bolt on to these fixings) EG and DC should also be the same though I think the DC2 uses a different master cylinder. Quote Link to comment Share on other sites More sharing options...
weaver88 Posted January 10, 2013 Share Posted January 10, 2013 i have the tegiwa imports dc2 brake stopper on my mb6 if that helps, fitted a treat Quote Link to comment Share on other sites More sharing options...
jasons Posted January 10, 2013 Author Share Posted January 10, 2013 cheers guys, the eg and dc2 stopper is the same, so if the dc2 stopper works on an mb6, I'll try one of those.Thanks again. Quote Link to comment Share on other sites More sharing options...
WilkesyMB6 Posted January 10, 2013 Share Posted January 10, 2013 I also have a Tegiwa DC2 one fitted Quote Link to comment Share on other sites More sharing options...
knight Posted January 10, 2013 Share Posted January 10, 2013 dc2 is the common one to use! Quote Link to comment Share on other sites More sharing options...
Dexter Posted October 30, 2014 Share Posted October 30, 2014 I decided i need a brake stopper so i ordered this: http://www.ebay.co.uk/itm/TEGIWA-BRAKE-STOPPER-HONDA-CIVIC-EG-INTEGRA-DC2-/171430553182?ssPageName=ADME:X:RTQ:GB:1123 ...but i got this: http://i149.photobucket.com/albums/s51/aarho/IMG_1910.jpg ...which looks a whole lot like this: https://www.tegiwaimports.com/tegiwa-brake-stopper-honda-civic-ek-lhd.html Here's a dryfit: (bear in mind my deck is LHD). It looks like it MIGHT fit. So what do you think, should i go ahead and see how the EK stopper fits or ask Tegiwa to send a DC2 stopper instead? I didn't even think about possible RHD/LHD issues when ordering but i guess i need specifically an LHD stopper because they're not symmetrical, right? Quote Link to comment Share on other sites More sharing options...
Grant Posted October 30, 2014 Share Posted October 30, 2014 Looks close enough mate I'd say .. Quote Link to comment Share on other sites More sharing options...
Dexter Posted November 22, 2014 Share Posted November 22, 2014 Ok still haven't fitted this. Just wanna make sure i can just remove those 2 bolts where the stopper will mount without having to worry about any of my suspension components falling off or getting misaligned? I guess the bolts hold the upper camber arm or mount or something. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.