southwestmb6 Posted December 29, 2009 Share Posted December 29, 2009 Well you certainly achieved that mate. Would have been sacrilidge to have broken the car itself. You must be keen to get all of it gone now , even the car . I always found that when you decide to get your car sold in the end you just want it gone . Keep up the good work and remember to stay involved with this site. (If not for us then think of your brother) Cheers Link to comment Share on other sites More sharing options...
tontvti Posted December 30, 2009 Share Posted December 30, 2009 You work quick!Any chance you took the hubs and calipers off the vti-s before you scrapped it?That dodgy caliper is eating the brake pads after only 6 weeks and I might need a fresh front hub, not diagnosed a new low speed noise yet Link to comment Share on other sites More sharing options...
civicturbo79 Posted December 30, 2009 Author Share Posted December 30, 2009 i sold all the corners of the suspension to someone that had been off the road in there car , Plus one side suspension was damaged anyway . I do have the rear calipers , Im going to get them recondictioned as they are a comment fault .Then sell them on here on an exchange basis so once you have fitted the new ones you send me the old ones back so that i can keep getting a set recondictioned.Im looking for £110 posted and then it will cost the buyer £10 to post back so total £120 . Rich. Link to comment Share on other sites More sharing options...
Dave Posted December 31, 2009 Share Posted December 31, 2009 thats a cracking deal for reconed calipers rich, nice one! Link to comment Share on other sites More sharing options...
civicturbo79 Posted January 20, 2010 Author Share Posted January 20, 2010 Well i have done one or two things to the old girl this week . I got another rocker cover as i sold my rising sun one . Stripped it and removed the vtec dohc anf the honda wrighting off the cover and painted it orange flicked water on that and dusted a nice green over the top let the water evaperate off and clear coat the lot in . I then fitted a stanless steel ebay manifold and made a decat .Then a ordered the mother of all induction kits it was alot of money at £200 for the carbon kevlar induction kit and the spark plug cover to match it but will worth it . The filter is the loadest i have ever heard on a vtec engine worth ever penny. Rich. Link to comment Share on other sites More sharing options...
jalesi2001 Posted January 20, 2010 Share Posted January 20, 2010 Wow, nice one mate!! I wasn't sure if you were going to do anything to her, i take it you will be keeping her for a while then?!! Rocker cover looks mint bud, love the water effect, and the induction kit looks like a monster!! Link to comment Share on other sites More sharing options...
Dave Posted January 20, 2010 Share Posted January 20, 2010 That looks awsome Rich!! Loving her new look! Wish my standard mb6 looked that good haha! lol Good work mate Link to comment Share on other sites More sharing options...
Guest kev21 Posted January 20, 2010 Share Posted January 20, 2010 is the filter stright fit Link to comment Share on other sites More sharing options...
civicturbo79 Posted January 20, 2010 Author Share Posted January 20, 2010 Thank you for the good comments . The induction kit went almost straight on you just need to cut a small part of the bracket the holds the wiring plugs on the left hand side of the induction kit and let the plug hang down . Just got to order the paint and get the front end painted now and a new set of number plates . As for keep her she is already sold £2500 to someone i know as soon as she is paint she will be gone Rich. Link to comment Share on other sites More sharing options...
Homerduffbeer Posted January 20, 2010 Share Posted January 20, 2010 Thank you for the good comments . The induction kit went almost straight on you just need to cut a small part of the bracket the holds the wiring plugs on the left hand side of the induction kit and let the plug hang down . Just got to order the paint and get the front end painted now and a new set of number plates . As for keep her she is already sold £2500 to someone i know as soon as she is paint she will be gone Rich.why did you spend £200 on a filter and plug cover if your selling it ? or was that part of the deal ? i really want one of those induction kits Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.