KiNK43 Posted November 12, 2013 Share Posted November 12, 2013 Buckled wheel spigot rings????? Quote Link to comment Share on other sites More sharing options...
spudley1988 Posted November 13, 2013 Author Share Posted November 13, 2013 Going to check spigot rings today at work if am not too busy. Would something so small be able to contribute to this? Quote Link to comment Share on other sites More sharing options...
NIKH25 Posted November 13, 2013 Share Posted November 13, 2013 Yes, if the spigot is not perfect then the wheel will not be flush with the hub and would be more noticeable at speed, very similar to unbalanced wheels. Quote Link to comment Share on other sites More sharing options...
spudley1988 Posted November 17, 2013 Author Share Posted November 17, 2013 Just a little update, never had a chance to check spigots as work has been crazy at the minute. Did take it a run to newcastle yesterday so got a good chance to try and evaluate the issue lol. Only does it on acceleration, minute i let off the vibration goes. Also only really starts from 60 mph and can only really be felt through drivers side. Could this still be spigots? Thanks for all the reply guys will hopefully nail this soon. Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted November 17, 2013 Share Posted November 17, 2013 I think you need a new driveshaft Quote Link to comment Share on other sites More sharing options...
spudley1988 Posted November 17, 2013 Author Share Posted November 17, 2013 Cool will look into that J&R motors place as it was only £30 odd quid if my memory serves me correctly. Can anyone confirm if these guys are any good as a few mates thought the price was awfy cheap for a shaft. Quote Link to comment Share on other sites More sharing options...
simpo Posted November 17, 2013 Share Posted November 17, 2013 As jake says new driveshaft. Sounds like bearings are warn Quote Link to comment Share on other sites More sharing options...
spudley1988 Posted November 17, 2013 Author Share Posted November 17, 2013 Is it still safe to drive until the repairs are done? Quote Link to comment Share on other sites More sharing options...
simpo Posted November 17, 2013 Share Posted November 17, 2013 Up to u really. If you are I wouldn't go racing around and avoid high speeds as much as u can Quote Link to comment Share on other sites More sharing options...
spudley1988 Posted November 17, 2013 Author Share Posted November 17, 2013 Nice one will keep it down till I get part this week. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.